My Rig can do EpicFLOPs, Can yours?
Once this baby hits 88 TeraFLOPs, You're going to see some serious $@#%....
Build XT7 is currently active.
Current OS Systems: Windows 10 64bit
Wrong, my previous run was made at the same core 732 and the mem at 1127 and before the 3dmark06 patch, so it wasn't reading my gpu clocks.
16042 for 163.71 http://service.futuremark.com/compare?3dm06=3318218
16631 for 169.01 http://service.futuremark.com/compare?3dm06=3535396
And a comparison between 163.75 and 169.01 at stock gtx clocks of 621/1000
14149 for 163.75 http://service.futuremark.com/compare?3dm06=3537982
14808 for 169.01 http://service.futuremark.com/compare?3dm06=3537821
I can back up everything I post so GROW UP!
It's better to remain silent and be thought a fool than to open your mouth and remove all doubt.
Last edited by dengyong; 10-27-2007 at 04:20 PM.
Its hard to tell but so far it seems under vista 32 and xp home the new drivers are more stable than the previous 167.26.
Yah it doesnt seem as if there is any gains but rather increased stability.
P.S. i can atest to dengyong scores. The modifications he has done to his card DO allow for increased performance thus the higher scores in benchmarking.
Slightly better performance increase at stock gtx clock than overclocked.
Test results in post #29.
This driver also fixes the desktop resize issue for hdtv.
Last edited by dengyong; 10-27-2007 at 06:52 PM.
this driver improved frames in crysis for me, that also work well with HL2 Ep2, UT3 demo.
My card still overclocks fine with riva 2.05 and 2.06
gtx at 650/1620/2000
also the 64 bit dont run for me either with any driver I have tried, it just hangs in one spot or another almost right after it launches...
Mpower Max | 4770k | H100 | 16gb Sammy 30nm 1866 | GTX780 SC | Xonar Essence Stx | BIC DV62si | ATH AD700 | 550d | AX850 | VG24QE | 840pro 256gb | 640black | 2tb | CherryReds | m60 | Func1030 |
HEAT
Over 163.76, this gave me another 3-4fps in the Crysis GPU timedemo.
System
ASUS Z170-Pro
Skylake i7-6700K @ 4600 Mhz
MSI GTX 1070 Armor OC
32 GB G.Skill Ripjaws V
Samsung 850 EVO (2)
EVGA SuperNOVA 650 G2
Corsair Hydro H90
NZXT S340
i still dont know whats wrong here. im on vista, specs in sig. and i lost almost 600 points in 3dmark06. i havent tried that new patch though for mark, so i will try that.
my crysis performs worse aswell. but seems most people love these new betas...
ill try em again, and the new riva
~
My Rig can do EpicFLOPs, Can yours?
Once this baby hits 88 TeraFLOPs, You're going to see some serious $@#%....
Build XT7 is currently active.
Current OS Systems: Windows 10 64bit
I gained another 400 +/- 3DMark06 with stock settings but they dont like to be OC'ed with the last beta drivers I could easaly overclock to 680Mhz core seems this new driver will either lock up or end 3Dmark during testing.
_______________________
C2D E6550 @ 3150Mhz 1.4625v
Cooler Master Hyper TX2
Gigabyte GA-P35-DS3P
2GB Crucial Ballistix PC2-6400 5-5-5-12 FSB 5:6 1130Mhz
XFX 8800GTS G80 320MB @ 680/1100
OCZ GameXtreme 700W
250GB WD Caviar's - RAID 0
the 3DMark06 Hotfix did the trick for me.... So went ahead and did some tweaking...
163.75 Beta Driver (680 core 1100 memory):
169.01 Beta (I was getting artifacts @ 680 core, so clocked it down slightly to 671Mhz)
![]()
_______________________
C2D E6550 @ 3150Mhz 1.4625v
Cooler Master Hyper TX2
Gigabyte GA-P35-DS3P
2GB Crucial Ballistix PC2-6400 5-5-5-12 FSB 5:6 1130Mhz
XFX 8800GTS G80 320MB @ 680/1100
OCZ GameXtreme 700W
250GB WD Caviar's - RAID 0
Bookmarks