Can't run in dual channel mode with my Corsair Dominator 8500Ds with bios 107.Originally Posted by STaRGaZeR
Not a problem, we have vdroop mod for it
Any other issue? Dividers not working or something?
Thx
Can't run in dual channel mode with my Corsair Dominator 8500Ds with bios 107.Not a problem, we have vdroop mod for it
Any other issue? Dividers not working or something?
Thx
i think it's cuz ur using domi-failures....j/k
the 8500 is good ram but i think the 10000 dominators were a joke. Corsair sent me 2GB's of that crap and i ended up selling it for $200 cuz no one really wanted them....
Doesn't surprise me.i think it's cuz ur using domi-failures....
the 8500 is good ram but i think the 10000 dominators were a joke. Corsair sent me 2GB's of that crap and i ended up selling it for $200 cuz no one really wanted them....
i won't buy corsair any time soon...i have a set of DDR2-1142 and never been more disappointed in them!i think it's cuz ur using domi-failures....
the 8500 is good ram but i think the 10000 dominators were a joke. Corsair sent me 2GB's of that crap and i ended up selling it for $200 cuz no one really wanted them....
Last edited by Ace-a-Rue; 10-23-2007 at 08:03 AM.
BIOSTAR TPOWER I45 UNOFFICIAL THREAD
BIOSTAR TPOWER BOLT MOD FOR HEATPIPE AND HEATSINK
BIOSTAR TPOWER I45 BIOS FLASHING PROCEDURE
ABIT IP35 PRO HEATPIPE MOD
ABIT IP35 PRO BIOS FLASHING PROCEDURE
IP35 Pro: 9650@4000Mhz, par overclocker; Freezone Elite; 4Gb GSkill DDR-800@DDR-1068 (2 x 2gb); XFX 8800 GTS; Areca 8X PCIe in Raid 0 working at 4x speed; 4-250 Gb (single platter) 7200.10 drives; Giga 3DAurora case with side window.
best board i've ever owned... i'm really pleased with the overclocking ability. very stable board and it loves my quad.... cant wait for a 45nm now.....
heres a pic
P5E BIOS 0107 (works like a charm, absolutely NO issues) + vdroop mod is a winner combination. This simple mod has rise my stable speed by 100Mhz with the same load voltage. Awesome. It tooks 5 seconds to do it.
Friends shouldn't let friends use Windows 7 until Microsoft fixes Windows Explorer (link)
do you have a link to the mod?
BIOSTAR TPOWER BOLT MOD FOR HEATPIPE AND HEATSINK
BIOSTAR TPOWER I45 BIOS FLASHING PROCEDURE
ABIT IP35 PRO HEATPIPE MOD
ABIT IP35 PRO BIOS FLASHING PROCEDURE
IP35 Pro: 9650@4000Mhz, par overclocker; Freezone Elite; 4Gb GSkill DDR-800@DDR-1068 (2 x 2gb); XFX 8800 GTS; Areca 8X PCIe in Raid 0 working at 4x speed; 4-250 Gb (single platter) 7200.10 drives; Giga 3DAurora case with side window.
See page 3 of this same thread.
Friends shouldn't let friends use Windows 7 until Microsoft fixes Windows Explorer (link)
I just got the P5E too. I have no need for the lcd or the watercooling option, so I decided to save the 50€ or so. I just hope that they keep up with the bioses on this thing as well.
Too bad, but I don't the time to put the thing together today... :/ I've got a Q6600 G0 waiting.
Yeah, the Maximus extra crap is about 60-70€ more here than the P5E on average.
Friends shouldn't let friends use Windows 7 until Microsoft fixes Windows Explorer (link)
do you just pencil over where the pic has a black mark.... the v mod isnt clear to me. could someone enlighten me so i can do it. thanks in advance...
and @ bigchrome, you do recieve the same sound card as with the maximus... but it isnt a bonafied sound card. its just a codec.
Last edited by purecain; 10-23-2007 at 10:52 AM.
It is more than simple. Open the case, turn off power supply, grab the pencil and few times go over orange highlighted resistor. I just did it with my daughter's HB pencil. Works like charm. Load and idle vcore exactly the same - 1.400 v. In bios set to some 1.4125.do you just pencil over where the pic has a black mark.... the v mod isnt clear to me. could someone enlighten me so i can do it. thanks in advance...
CPU:Q6600 G0@3.6 Batch L723A795; 1.352 vcore
COOLER:Thermalright Ultra120 Xtreme Scythe S-Flex S-FDB 120mm 1600rpm
MOBO: Asus P5E , bios 0702
RAM: Corsair CM2X2024-6400C4
CASE: Lian Li G70B mod
PSU: Silverstone Olimpia OP 750
GPU: XFX GeForce 8800 GTS 320MB
OS: Windows XP SP3 ; Windows Vista Ultimate x64 SP1
OK, got the board next to me right now...You were right of coursedo you just pencil over where the pic has a black mark.... the v mod isnt clear to me. could someone enlighten me so i can do it. thanks in advance...
and @ bigchrome, you do recieve the same sound card as with the maximus... but it isnt a bonafied sound card. its just a codec.
E8600 4.5ghz folder
Asus P5Q Deluxe
Enermax Galaxy DXX 1000W
2x2GB OCZ Reaper PC8500
2xPowercolor HD 2900XT (modded to run constant 3d clocks)
Swiftech H220 Ultra Apex
I bought the P5E. Intel heatsink Xeon X3220, 2x 1 gb OCZ 800. I set the FSB to 400, Ram to DDR2-800 and the FSB to 1:1. Dropped the multi to 6 instead of 9.
I can't get the board to adjust the Ram voltage. The selection is fixed on AUTO and can not be changed. I am using bios 203.
Other than that, great motherboard, simple setup. Worked without any hitches.
Just type a value for the ram voltage, hit enter and then you can adjust it with +/-. A really strange feature someone could even call a bug...
Is there no sensor for ramvoltage readout ???
If not , can somebody tell me where i can readit on the board with a multimeter.
CPU : Intel Core 2 Extreme QX9650
MB : Asus P5E X38 Rampage bios
RAM : Team Xtreem 4x1GB DDR2 OPB handpicked
VGA : Sapphire 4870
Power : Antec Quattro 850w
Storage : 1 x 60GB OCZ Vertex + 2 x 750gb WD 32Mb
DVD : Samsungs DVDwriter Sata + Liteon DVD
Sound : Creative XFI Xtrememusic
Cooling : D-Tek Fusion + D-Tek Fusion GFX
Monitor : Samsung 226BW
Errorcode : An error occurred at address AC 20 DE AE FF BC ...... System halted.
Need help with Raid config,
i have 3 drives
1 Raptor 36g that i want my OS on
And 2 250g drives that i want to run in raid0
And all 3 drives are seen when im going to make the aray, i take only the 2 disk that i want and the raptor says non raid disk, so far so good, booted and the aray is there with 465g, but the raptor is also a raid disc and want boot my OS.
Can i not have raid on only 2 disks on sata 2-3 and my raptor in sata0, wery strange this.
Sorry all for my very poor/bad english.
My System
Asus P6T Deluxe, X58, Socket-1366
Intel Core™ i7 920 Quad
Corsair Dominator DHX+ DDR3 1600MHz 12 Gig
Gigabyte GeForce GTX 280 1GB PhysX CUDA
Samsung SpinPoint F1 750GB SATA2 x4
Tagan BZ 800W
thanks will get on this tommorrow, appreciated.....
thanks!...found it on page 4 for me.
BIOSTAR TPOWER BOLT MOD FOR HEATPIPE AND HEATSINK
BIOSTAR TPOWER I45 BIOS FLASHING PROCEDURE
ABIT IP35 PRO HEATPIPE MOD
ABIT IP35 PRO BIOS FLASHING PROCEDURE
IP35 Pro: 9650@4000Mhz, par overclocker; Freezone Elite; 4Gb GSkill DDR-800@DDR-1068 (2 x 2gb); XFX 8800 GTS; Areca 8X PCIe in Raid 0 working at 4x speed; 4-250 Gb (single platter) 7200.10 drives; Giga 3DAurora case with side window.
P5E
Please HELP ME:
How do you turn the CPU & DRAM voltages on this board????
Also when you turn RAID on I cant see the DVDRAM, how come?????
Thank you
[SIGPIC][/SIGPIC]
U must give the voltages manual , there where Auto stands.
Just go with the arrow down until u stand on the vcore ( highlights ) then type 1350 , if u give this in after that the voltages is adjustable when u press the + or - key ( never seen anything like this .... )
And also do the vdroop mod , this helps alot !
CPU : Intel Core 2 Extreme QX9650
MB : Asus P5E X38 Rampage bios
RAM : Team Xtreem 4x1GB DDR2 OPB handpicked
VGA : Sapphire 4870
Power : Antec Quattro 850w
Storage : 1 x 60GB OCZ Vertex + 2 x 750gb WD 32Mb
DVD : Samsungs DVDwriter Sata + Liteon DVD
Sound : Creative XFI Xtrememusic
Cooling : D-Tek Fusion + D-Tek Fusion GFX
Monitor : Samsung 226BW
Errorcode : An error occurred at address AC 20 DE AE FF BC ...... System halted.
In the BIOS under Advanced>Jumperfree Configuration, have you set Ai Overclocking to Manual instead of Auto ?P5E
Please HELP ME:
How do you turn the CPU & DRAM voltages on this board????
i950 (3035B684)
Gigabyte EX58A-UD3R
3x4GB G.Skill PC3-12800 7-8-7-24
HIS Radeon HD 6970 2GB & Dell 3007WFP-HC
Asus Xonar DX
128GB C300, Velociraptor & Sammy F3's
Corsair AX850W
Windows 7 Ultimate x64 SP1
Man I'm loving my P5E! This things overclocks my Q6600 miles better than the Blood Iron I had for three day before it destroyed itself. Maybe it's something to do with the new Seasonic psu as well, but right now I'm running prime at 3600 (my original target) with around 1,4v (taking the vdroop into account). I need to do the vdroop mod as well.
Asus P5E X38 - Q6600 G0 - Tuniq Tower - Transcend Axeram DDR800 2x1GB - Radeon 1950 Pro 512MB - 2x250GB Maxtor Maxline - Seasonic S12 E+ 650W - Samsung 226BW
If you do that mod, you will gain a few Mhz too at the same final voltage
Friends shouldn't let friends use Windows 7 until Microsoft fixes Windows Explorer (link)
I might say something about your avatar, but maybe I just stay quiet...
Asus P5E X38 - Q6600 G0 - Tuniq Tower - Transcend Axeram DDR800 2x1GB - Radeon 1950 Pro 512MB - 2x250GB Maxtor Maxline - Seasonic S12 E+ 650W - Samsung 226BW
Posting Permissions
Reply With Quote
Bookmarks