P5K Premium issue

[thefiddler]

Well, unfortunately, it seems that disabling the LPM didn't fix the issue.

The Event Viewer didn't show any iaStor error this time, but still I had a BSOD while trying to move a large file from one HDD to another.


(BSOD error code is "Error code 00008086, parameter1 00000000, parameter2 00000000, parameter3 00000000, parameter4 00000000.")

[sesdave]

Well, unfortunately, it seems that disabling the LPM didn't fix the issue.

The Event Viewer didn't show any iaStor error this time, but still I had a BSOD while trying to move a large file from one HDD to another.


(BSOD error code is "Error code 00008086, parameter1 00000000, parameter2 00000000, parameter3 00000000, parameter4 00000000.")

You are not alone by the way - a google finds a host of others with similar problems . The common factor is use of ICHxR controller and either AHCI or RAID e.g http://www.hardwareanalysis.com/cont...c/12946/?o=480
Well at least the iastor message has gone. Was it the lastest AHCI sata driver you loaded when you installed XP?. Try running in IDE and see if it goes as an interim measure until the cause is found - it may be driver related. Did you add any additional card to your machine or usb drive about the time this started happening - It would be prudent to get a higher spec PSU e.g 700w -especially as u a running a q6600 and 8800GTX with this MB and the 550w probably hasnt got a future MB life.