No yet m8.Originally Posted by loc.o
I'm building a project and still waiting for some parts.
Your results are very nice and tempting though!
No yet m8.
I'm building a project and still waiting for some parts.
Your results are very nice and tempting though!
Project ZEUS II
Asus Rampage II Extreme
Intel I7 920 D0 3930A @ 4.50GHz (21 X 214mhz)
3 x 2GB G.Skill Trident 1600 @ 1716MHz (6-8-6-20-1N)
2 x Asus HD 6870 CrossFire @ 1000/1100MHz
OCZ Vertex 2 60GB | Intel X25-M 120GB | WD Velociraptor 150GB | Seagate FreeAgent XTreme 1.5TB esata
Asus Xonar DX | Logitech Z-5500 | LG W2600HP 26" S-IPS LCD
Watercooling setup:
1st loop -> Radiator: 2 x ThermoChill PA120.3 | Pump: Laing DDC-3.25 with Alphacool HF 38 top | CPU: Swiftech Apogee XT | Chipset: Swiftech MCW-NBMAX | Tubing: Masterkleer 1/2" UV
2nd loop -> Radiator: ThermoChill PA120.3 | Pump: Laing DDC-3.2 with Alphacool HF 38 top | GPU: 2 x EK FC-6870 | Tubing: Masterkleer 1/2" UV
Assembled in Mountain Mods Ascension Trinity
Powered by Corsair Professional Series Gold AX1200
how much volts would you guys put on this kit for 24/7, assuming it's actively cooled (OCZ mem cooler here)? thnx
DFI ICFX3200 07/30 w/ MCW30
E6600 L632A407 w/ EK Supreme
Powercolor HD3870 w/ MCW60
OCZ Reaper 2x2GB CAS4
WD Caviar Black 1TB
Silverstone Strider 750W
MM U2-UFO Extended CYO
CPU & NB loop = PA120.3, DDC 18W w/ Petra's top, 7/16''
VGA loop = PA120.2, DDC 18W w/ Petra's top, 7/16''
10 fans on 7V, PX-750A, all on SM 930BF
" Having a DFI board is like having a hot girlfriend thats a total b1tch" ...
The same as has always been safe with Micron D9 chips. 2.2v 24/7, you'll risk killing them faster with 2.3-2.4 over long periods of time.
Formerly XIP, now just P.
damn, that's too low
what about those 2GB sticks, what's their case, for Micron ICs?
EDIT: what about those highly binned sticks that are rated to run at 2.35V like Corsair or OCZ, those are D9?
Last edited by marauder16; 10-30-2007 at 02:43 PM.
DFI ICFX3200 07/30 w/ MCW30
E6600 L632A407 w/ EK Supreme
Powercolor HD3870 w/ MCW60
OCZ Reaper 2x2GB CAS4
WD Caviar Black 1TB
Silverstone Strider 750W
MM U2-UFO Extended CYO
CPU & NB loop = PA120.3, DDC 18W w/ Petra's top, 7/16''
VGA loop = PA120.2, DDC 18W w/ Petra's top, 7/16''
10 fans on 7V, PX-750A, all on SM 930BF
" Having a DFI board is like having a hot girlfriend thats a total b1tch" ...
Yes, the high end FleXLC and Dominator sticks from OCZ and Corsair use D9. Just because they rate them to 2.35-2.4v, does not mean they are any more tolerant to those voltages than the rest of the D9 sticks out there, they just mean that they are willing to warranty it for the few that buy them.damn, that's too low
what about those 2GB sticks, what's their case, for Micron ICs?
EDIT: what about those highly binned sticks that are rated to run at 2.35V like Corsair or OCZ, those are D9?
Formerly XIP, now just P.
that is a good point, just another part of my question:
what about those 2GB sticks, what's their max V, for Micron ICs?
thnx for your help
DFI ICFX3200 07/30 w/ MCW30
E6600 L632A407 w/ EK Supreme
Powercolor HD3870 w/ MCW60
OCZ Reaper 2x2GB CAS4
WD Caviar Black 1TB
Silverstone Strider 750W
MM U2-UFO Extended CYO
CPU & NB loop = PA120.3, DDC 18W w/ Petra's top, 7/16''
VGA loop = PA120.2, DDC 18W w/ Petra's top, 7/16''
10 fans on 7V, PX-750A, all on SM 930BF
" Having a DFI board is like having a hot girlfriend thats a total b1tch" ...
I'd say about the same, but remember with the 2GB sticks, heat will become more of an issue than it is with 1GB sticks, so you'll want to pay more attention to keeping them cool.that is a good point, just another part of my question:
what about those 2GB sticks, what's their max V, for Micron ICs?
thnx for your help
Formerly XIP, now just P.
Posting Permissions
Reply With Quote
Bookmarks