**Official DFI LanParty UT P35-T2R Review/Overclock/Guide Thread**

[Raja@ASUS]

good luck, we have exerienced random failures and system crashes with D9GKX based modules, when clocked anywhere over 1050mhz cas4 or cas 5. The fault lies with Intel's DDR2 controller implementation, such a shame really, as those who paid high price for good kits deserved a little better.. Other than 1m runs, it's not really possible to do anything meaningful with them, gaming, folding even running encoding applications represent a fair load, expect some blue screens or failure messages mid run. USing over 2.4v with Micron ususally leads to deterioration within 6 months, even if cooled, electromigration is a big issue.

regards
Raja

[emoners]

Guys this is my current 24/7 setup...stable for more than 8-hours over Prime95, Orthos & OCCT:





http://valid.x86-secret.com/show_oc.php?id=257188

I was hoping for some suggestions/comments/opinions if I could squeeze more with lower voltages good for 24/7 run.

DFI™ LanParty UT P35-T2R (0913 Bios)
Intel™ Core2Duo E6850 with Thermalright™ HR-01 Plus @3602.09Mhz (450.26x8)
Team Xtreem™ DDR2-9600 2x1GB with Thermalright™ HR-07 @562.8Mhz
XFX™ NVidia™ 8800GTX with Thermalright™ HR-03 Plus (Core 650Mhz/Shader 1660Mhz/Memory 1030Mhz)
Creative™ Sound Blaster X-Fi™ XtremeGamer Fatal1ty Pro
Western Digital™ Raptor 74GB & Seagate™ Barracuda 500GB+320GB SATA
Silverstone™ DA750

>CPU Feature:
 
Thermal Management Control.......... - Disabled
PPM(EIST) Mode...................... - Disabled
Limit CPUID MaxVal.................. - Disabled
CIE Function........................ - Disabled
Execute Disable Bit................. - Enabled
Virtualization Technology........... - Enabled
Core Multi-Processing............... - Enabled
 
>DRAM Timing:
 
Enhance Data transmitting........... - Fast
Enhance Addressing.................. - Fast
T2 Dispatch......................... - Enabled

>Clock Setting Fine Delay Press Enter:

[COLOR=blue]Ch1 Clock Crossing Setting......... - More Aggressive
[COLOR=blue]DIMM1 Clock Fine Delay............. - Current[1]
[COLOR=blue]DIMM2 Clock Fine Delay............. - Current[6]
[COLOR=blue]Ch1 ControlFine Delay.............. - Current[9]
[COLOR=blue]Ch1 ControlFine Delay.............. - Current[6]

[COLOR=blue]Ch2 Clock Crossing Setting......... - More Aggressive
[COLOR=blue]DIMM3 Clock Fine Delay............. - Current[1]
[COLOR=blue]DIMM4 Clock Fine Delay............. - Current[6]
[COLOR=blue]Ch2 ControlFine Delay.............. - Current[9]
[COLOR=blue]Ch2 ControlFine Delay.............. - Current[6]

[COLOR=blue]Ch1 Ch2 Common Clock Setting....... - More Aggressive

[COLOR=blue]Ch1 RDCAS GNT-Chip Delay........... - Auto
[COLOR=blue]Ch1 WRCAS GNT-Chip Delay........... - Auto
[COLOR=blue]Ch1 Command To CS Delay............ - Auto

[COLOR=blue]Ch2 RDCAS GNT-Chip Delay........... - Auto
[COLOR=blue]Ch2 WRCAS GNT-Chip Delay........... - Auto
[COLOR=blue]Ch2 Command To CS Delay............ - Auto

CAS Latency Time (tCL).............. - 5
RAS# to CAS# Delay (tRCD)........... - 5
RAS# Precharge (tRP)................ - 4
Precharge Delay (tRAS).............. - 12
All Precharge to Act................ - Auto
REF to ACT Delay (tRFC)............. - 42
Performance Level................... - 6

>Read delay phase adjust Press Enter:

[COLOR=blue]Channel 1 Phase 0 Pull-In.......... - Auto
[COLOR=blue]Channel 1 Phase 1 Pull-In.......... - Auto
[COLOR=blue]Channel 1 Phase 2 Pull-In.......... - Auto
[COLOR=blue]Channel 1 Phase 3 Pull-In.......... - Auto
[COLOR=blue]Channel 1 Phase 4 Pull-In.......... - Auto

[COLOR=blue]Channel 2 Phase 0 Pull-In.......... - Auto
[COLOR=blue]Channel 2 Phase 1 Pull-In.......... - Auto
[COLOR=blue]Channel 2 Phase 2 Pull-In.......... - Auto
[COLOR=blue]Channel 2 Phase 3 Pull-In.......... - Auto
[COLOR=blue]Channel 2 Phase 4 Pull-In.......... - Auto

MCH ODT Latency..................... - Auto
Write to PRE Delay (tWR)............ - 13
Rank Write to Read (tWTR)........... - 11
ACT to ACT Delay (tRRD)............. - 3
Read to Write Delay (tRDWR)......... - 8
Ranks Write to Write (tWRWR)........ - Auto
Ranks Read to Read (tRDRD).......... - Auto
Ranks Write to Read (tWRRD)......... - Auto
Read CAS# Precharge (tRTP).......... - Auto
ALL PRE to Refresh.................. - Auto

>Voltage Settings:
 
CPU VID Control..................... - 1.32v
CPU VID Special Add................. - Auto
DRAM Voltage Control................ - 2.11v
SB 1.05V Voltage.................... - 1.070v
SB Core/CPU PLL Voltage............. - 1.55v
NB Core Voltage..................... - 1.42v
CPU VTT Voltage..................... - 1.34v
Vcore Droop Control................. - Disabled
Clockgen Voltage Control............ - 3.45v
GTL+ Buffers Strength............... - Strong
Host Slew Rate...................... - Weak
GTL REF Voltage Control............. - Disabled
CPU GTL1/3 REF Volt................. - 110
CPU GTL 0/2 REF Volt................ - 110
North Bridge GTL REF Volt........... - 110
 
Genie BIOS Settings:
 
Exist Setup Shutdown................ - Mode 2
CLOCK VC0 divider................... - Auto
CPU Clock Ratio Unlock.............. - Enabled
CPU Clock Ratio..................... - 8
Target CPU Clock.................... - 3550MHz
CPU Clock........................... - 450
Boot Up Clock....................... - Auto
DRAM Speed.......................... - 266/667
Target DRAM Speed................... - 1124MHz
PCIE Clock.......................... - 110mhz
PCIE Slot Config.................... - 1x 1x
CPU Spread Spectrum................. - Disabled
PCIE Spread Spectrum................ - Disabled
SATA Spread Spectrum................ - Disabled

Thanks!

[Brother Esau]

I think for the most part we are all expecting AMD Memory performance from this board but reality dictates that its not gonna happen!