ASUS P5W DH - Problems + Fixes Thread

[Snake_Eyes]

Can some tell me why i cant run 4.4.4.11 on 3.3Ghz Q6600 G0 ?
if i set it to 4.4.4.11 it dont boot anymore (no bios)
The timings thats works well are 5.6.6.18
I dont understand why it does not run on 4.4.4.11 on 3.3Ghz.

Can some explane me why this not work and what timing i can best use for 3.3 Ghz ?

EDIT: i have already found it was the volt of the memory
But to high can i set the memory volt ?
I got Kingston HyperX DDR2-800 2 Gig 2x1Gig 2048mb CL4.

[Zeus]

Your timings are not directly related to your CPU end speed.
Running 1:1 mode howerever forces the memory to run higher as soon as you raise FSB frequency.

Your mem will require more voltage the higher you raise their speed or you need to give them some breath by loosen up the timings like you suggested yourself.

Running a FSB/memory divider can help you increase or decrease your memspeed, thing is, these divider don't work well on this board.

At least not on mine, that's why i got me a P5K-E now.