ASUS P5B-Deluxe; Problems & Fixes

[chuckbam]

it shows in the device manager as "Uknown device", the screenshot up there shows the details after I "right-clicked it".
still no solution...

snnoopypw

Do you have the Intel Chipset Software Utility 8.3.1.1009 9/24/2007 installed?



http://www.intel.com/support/chipsets/sb/CS-022768.htm

Do you have the ASUS ATK0110 installed? I have that disabled and I have an unknown device. But, not in Matrix Manager.

I have an unknown USB device. I think that is a defective back USB header connector on the MB. My first MB I RMAed for a bad firewire port.

[snnoopypw]

Do you have the ASUS ATK0110 installed?

nope.
just installed it and it works.
thank you!!!

[Inteleron]

I have the same issue. My usb ports wont recognize anything I plug into them are my usb ports dead? should I RMA?

[higgins]

Ok guys, I'm having a pretty weird issue. Cpu-z, or any other kind of software monitoring tool, can't see my mem timings any more. I don't have any kind of issues, hangups or what ever. The timings are as always set to 4-4-4-12 in the BIOS.

The systools readings are PRETTY weird hehe. Got the same performance as before this started so the readings have to be wrong.



Not a big problem really, but pretty annoying. I recon a format and reinstall of XP would do the trick, but thats a pain in the ... Just checking to see if any of you guys had this kinda stuff before.

[chuckbam]

I have the same issue. My usb ports wont recognize anything I plug into them are my usb ports dead? should I RMA?

Well I almost jumped ship with a P35 board. I returned it because the realtek controller would not read either of my two DVD/CD RW. I have one SATA and one IDE. I even deleted a RAID. I was trying to load Vista on it for 1/2 of day. Why is realtek making controllers anyway?

I re-installed vista again just to see if it would work again with the JMicron and the IDE. Then, just did a complete restore with my restore file. Updated my files and was back whole again.

RMA I just canceled my ASUS RMA. Since it is only the two back panel USB connectors, I decided I did not want to pull the board again.

What you need is the S/N on the board. But, It is also on the box. From that they can tell the date and it has, I think, 1 year. You can get an advanced replacement. They are not hard to work with.

I think this works asus: tec support 502 995 0883

If all your USB ports are out, you need to RAM the board... I would think.