GIve us somme OC results !!!
fast and lots
GIve us somme OC results !!!
fast and lots
BoinC freak
Hold up, wait a minute, 2.4V CPUvoltage and 3.4V Dram?
Are you sure this is the right bios?
Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB
Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing
Case: Murdermodded TJ-07
sub 9 sec. SPi1M 940BE 955BE 965BE 1090T
Any word on the Chipse, X38 or X48? I think that we might see Asus release X48 based Motherboard before this year is over. What's your guys Opinion? And I can't wait to see this boards results.
THX!
Hope to have some numbers tonight. Its X38 Vegettoxp.
Last edited by Viss; 10-03-2007 at 09:54 AM.
I'm very curious about NB-temps with the heatsink/wc-block as is, because adding that 8mm thingy to a 1/2" loop is a definate no go..
Very very stock/auto settings
Very interested in the results..... would love to see some work with DDR2 800 3-3-3-6 compared to 1000 DDR2 4-4-4-12 if that is at all possible with any of your sticks
Set Multi x6 and fsb 500 for start
AC should be enough for that...
BoinC freak
Thanks SynGroW, if overclocking is good on this board, I think I'm buying one on the 12th Muahahahahhahaahaha.
Home PC: Intel i7 4770K @ 4.6ghz l Asus Maximus VI Hero l Corsair Dominator Plantinum 2400mhz (4x4GB) l Asus GTX 690 l Samsung 840 Pro 256gb l 2 x WD Black 1T storage drive l WD MyBook 500gb External l Samsung SH-S203N DVD l Creative X-Fi Titanium HD l Corsair AX1200 PSU l Planar SA2311W23 3D LCD Monitor l Corsair 800D Case l Windows 7 Ultimate 64 bit l Sennheiser HD-590
Water Cooling Setup: Swiftech 320 Radiator (3 X Gentle Typhoons 1450rpm 3 x Gentle Typhoons 1850 rpm) l Swiftech Pump w/XSPC Res Top l Heatkiller 3.0 CPU Block l Heatkiller GPU-X GTX 690 "Hole Edition" Nickel l Heatkiller Geforce GTX 690 GPU Backplate l Koolance 140mm Radiator l Danger Den 1/2ID UV Green tubing l EK EKoolant UV Green Liquid
-Impossible is not a word
DDR800 (1:1 divider) CL3-3-3-6:Originally Posted by ChaosMinionX
Very interested in the results..... would love to see some work with DDR2 800 3-3-3-6 compared to 1000 DDR2 4-4-4-12 if that is at all possible with any of your sticks
DDR1000 (4:5 divider) CL4-4-4-12
Tests done with sub-timings set to manual (but with stock subtimings, so pretty loose)
Untweaked Win2K3
Summary:
CL3 1M: 20.047
CL4 1M: 19.735
CL3 8M: 3m49.547
CL4 8M: 3m43.797
DDR1000 CL4 is faster than DDR800 CL3
Are the BIOS's the same for these two boards?
How is the PWM area guys ? hot as the P5K dlx ? I just preordered mine , damn I have to wait at least 15 days pfffff and pay it :p
Question : Why do some overclockers switch into d*ckmode when money is involved
Remark : They call me Pro AsusSaaya yupp, I agree
You can put some insane voltage true your hardware whit this board
Show us the capability´s of that nice chipset!!
Last edited by Disaster_Master; 10-03-2007 at 11:41 AM.
To be a professional noob/idiot
* Default factory speed is for noobs.
* Everything must go above the speed that the factory consider safe.
* Everything for more performance
* Everything fits, and everything can be broken.
* Most problems can be fixed by adding a volt or two.
* Post things in your signature that makes no sense at all.
mine this still in the box :| , havent even had time yet to realy look at it let alone fire it up.
cpu : e6850 @ 3.5ghz
cooler : boxed
mem : balistix 8500 @ 1000mhz 4-4-4-4
board : asus p5k-e wifi
graphics : 7800gtx
harddisk : wd raptor 74gb
dvd : nec 7173A
dvdrw : optiarc 18x
psu : enermax liberty 620W
screen : dell 3007wfp hc
Thanks a ton for that SynGroW, really appreciate you taking the time to do that, would appear X38 isnt exactly like 975x where I was getting better speeds with cas3 800, over cas4 1000.DDR800 (1:1 divider) CL3-3-3-6:
DDR1000 (4:5 divider) CL4-4-4-12
Tests done with sub-timings set to manual (but with stock subtimings, so pretty loose)
Untweaked Win2K3
Summary:
CL3 1M: 20.047
CL4 1M: 19.735
CL3 8M: 3m49.547
CL4 8M: 3m43.797
DDR1000 CL4 is faster than DDR800 CL3
Guess that clears that up, cant wait to get my hands on a maximus.
EDIT: Any idea on the latency differences between the 2 settings?
Should be the same since I have put every setting on manual and at the SPD value for both runs. Only changed the first 4 settings.
It might be possible that the board changes some latency's because of running a different divider but I can't check that.
I am dying to see testing of the air-cooled version of this board vs. P5K Premium
come on loco get that hd2900 fired up,whats your first impressions of the board
Ok, some first tests:
CPU vcore is undervolted by ~0,05v (difference between bios setting and CPUz)
DRAM voltage is overvolted by ~0,1v (difference between bios setting and bios monitoring)
vPLL voltage is overvolting by ~0,1v (difference between bios setting and bios monitoring)
Also vcore is dropping by 0,015v under load with load line calibration enabled according to CPUz.
Will check these results later with a DMM.
Now some overclocking:
Setup:
Intel Core 2 Duo E6300 ES cooled by OCZ Vindicator
Asus Maximus Formula
OCZ DDR2 PC2-9200 FlexXLC
Asus 8600GT Silent
OCZ Powerstream 520W
Max. FSB @ vPLL 2.3v
550MHz increasing vPLL increases max. FSB, so this result is CPU limited (validator link)
Max. mem @ 2.7v
700MHz CL5-6-6-21 (validator link)
It seems that the memory isn't running as great as it did on my P5K. I can run 1m at the same speed on my P5K with only 2.55v (bios setting) but with different subtimings.
Also a 1M run:
14.640s this run is also vPLL limited (forgot to make a validation file, will do that next time)
nice info syngrow and nice fsb
Does anybody, who owns a Maximus SE, knows if a swiftech MCW-30 fits on NB?
Project ZEUS II
Asus Rampage II Extreme
Intel I7 920 D0 3930A @ 4.50GHz (21 X 214mhz)
3 x 2GB G.Skill Trident 1600 @ 1716MHz (6-8-6-20-1N)
2 x Asus HD 6870 CrossFire @ 1000/1100MHz
OCZ Vertex 2 60GB | Intel X25-M 120GB | WD Velociraptor 150GB | Seagate FreeAgent XTreme 1.5TB esata
Asus Xonar DX | Logitech Z-5500 | LG W2600HP 26" S-IPS LCD
Watercooling setup:
1st loop -> Radiator: 2 x ThermoChill PA120.3 | Pump: Laing DDC-3.25 with Alphacool HF 38 top | CPU: Swiftech Apogee XT | Chipset: Swiftech MCW-NBMAX | Tubing: Masterkleer 1/2" UV
2nd loop -> Radiator: ThermoChill PA120.3 | Pump: Laing DDC-3.2 with Alphacool HF 38 top | GPU: 2 x EK FC-6870 | Tubing: Masterkleer 1/2" UV
Assembled in Mountain Mods Ascension Trinity
Powered by Corsair Professional Series Gold AX1200
The time is very bad for this frequency, can you run memset, i would like to see the subtimings for this setup.
Also a 1M run:
14.640s this run is also vPLL limited (forgot to make a validation file, will do that next time)
Dont forget it's a E6300... a 4MB CPU would easily do in the 13.X or even 12,9...
Main system:
Q6600 G0 L737B 3,8GHz
Maximus Formula X38
Ballistix PC2-8500 2x1GB
XFX 8800GT XT
Corsair HX620
X-Fi Platinum
150GB Raptor (Dual Boot) /2x 250GB WD Caviar (Apps)
Lian-Li V2000B Plus II
School: MacBook
Studying in: Pharmacy
Where: University of Montreal
Powerful!
come on loco lets see what this x38's got up to p35 you've got 2.4volt vcore to play with ouch !
Posting Permissions
Reply With Quote
Bookmarks