Quote Originally Posted by Calcu View Post
After having the IP35 Pro for over a week now, I'll comment on some of the problems I'm having with this board. First off, I've tried 3 different G0 stepping Q6600's(2x L727A903's & L726A820) and the first A9 wasn't bad, it did 3.2GHz(400x8) @ 1.30v stable(only Primed for 1+hr cause it was the first overcloked speed i tested) but I couldn't get 3.4 or 3.6GHz stable, no matter how much voltage I threw at it. Now the A8 was crap, 3.2GHz required almost 1.40v to keep stable and the current A9 I'm running is at 3.15GHz(450x7) because anything above that, it can't keep stable. As for FSB overclocking, the first A9 booted into windows @ 475FSB but I couldn't get it stable and the other 2 won't even boot @ 475FSB. So either I've had 3 crappy G0 Q6600's or this board is not overclocking my quads very well. But on a side note, I did try my old e6300 that did 495x7@1.35v on my DFI P965-S and it maxed out at the same 495x7@1.35v(looks like my e6300 has a wall @ 495) but this board did require .1v less on the memory to keep stable(2.15v vs 2.25v), so that was a plus. So I'm now debating on RMA'ing this board for another IP35 Pro, trying another different stepping Q6600 or hell, even trying the quad on my DFI,
Have you tried adjusting the other voltages? Sorry if that is a noob question for you. What divider are you using?

Latest BIOS?