Cellshock DDR3 -Another Masterpiece!

[jugeen]

i'm using the new kit with same settings and it is stable. no errors. no BSOD. weird and strange. don't know what the problem was with the rma'd kit.

hey man, dont think you will like this but... the kit you sent in for rma is running happily at 1975 876-21 1.8v here

[over@locker886]

hey man, dont think you will like this but... the kit you sent in for rma is running happily at 1975 876-21 1.8v here

hmm, this interesting..

[SOLDNER-MOFO64]

saaya and soldner, a beer is a good idea! two or more is better!

[|SiLA|]

let's see what my kit can do with p5k3

[|SiLA|]

trying to run the kit @1960 87621 2v 400x9

but no luck

trying 480x8 1960 876 1,9v and it works so i guess the divider doesn't work

[v_parrello]

trying to run the kit @1960 87621 2v 400x9

but no luck

trying 480x8 1960 876 1,9v and it works so i guess the divider doesn't work

I can not figure out which RAM multiplier you are using. With FSB 400 MHz and the biggest RAM multiplier (FSB:RAM=1:2) you can do DDR3-1600 and not more.

Anyway, you have to consider the NB strap, with 266 NB strap it is hard to reach RAM frequency close to 2000 MHz, with 200 NB strap it is quite impossible (when you choose RAM multiplier you change the NB strap if you do not fix it from bios setting "NB strap frequency").

[jugeen]

trying to run the kit @1960 87621 2v 400x9

but no luck

trying 480x8 1960 876 1,9v and it works so i guess the divider doesn't work

leave the NB strap frequency auto.

[saaya]

hmm, this interesting..

rufusz used the orange slots.
i tried the orange slots here as well and i have the exact same problem as rufusz. but in the black slots the kit passed orthos for 5 hours at 1950 876-21 with 1.8 or 1.85v, dont remember exactly.

hmmm how about it rufusz, should i see how high they clock with 765 just to annoy you? heheheh

oktoberfest? if your coming let me know so we can meet up hehehe

[jugeen]

now i learnt form that case. ddr3 micron in only black slots. i have to say honestly this new kit can clock in orange slots too at 1800 876-21 with 1.9v.

i am curious how high they clock with 765-21. just to know

rufusz used the orange slots.
i tried the orange slots here as well and i have the exact same problem as rufusz. but in the black slots the kit passed orthos for 5 hours at 1950 876-21 with 1.8 or 1.85v, dont remember exactly.

hmmm how about it rufusz, should i see how high they clock with 765 just to annoy you? heheheh


oktoberfest? if your coming let me know so we can meet up hehehe

[saaya]

ok, let me check

about the orange slots... yeah... some sticks can run well in the orange slots too, but they will run even better in the black slots in my experience

EDIT: 1830 765-18 1.9v stable

[jugeen]

lol sounds good!

i will check mine if i got a new psu

ok, let me check

about the orange slots... yeah... some sticks can run well in the orange slots too, but they will run even better in the black slots in my experience

EDIT: 1830 765-18 1.9v stable

[over@locker886]

rufusz used the orange slots.
i tried the orange slots here as well and i have the exact same problem as rufusz. but in the black slots the kit passed orthos for 5 hours at 1950 876-21 with 1.8 or 1.85v, dont remember exactly.

hmmm how about it rufusz, should i see how high they clock with 765 just to annoy you? heheheh


oktoberfest? if your coming let me know so we can meet up hehehe

aha, same rule have in Asus P5K "vanilla". Black slots better..

I don't know..I need save money for DDR3... but I hate bear, only wine

[jugeen]

you mean beer not bear

aha, same rule have in Asus P5K "vanilla". Black slots better..

I don't know..I need save money for DDR3... but I hate bear, only wine

[saaya]

i really wonder why the orange slots are worse... i think its the voltage...

[jugeen]

it makes me remember DFI LP NF4 times...

i really wonder why the orange slots are worse... i think its the voltage...

[over@locker886]

you mean beer not bear

LOOL.. , off course

[|SiLA|]

running mine at 1850 7 6 5 18 with 1,9 on my p5k3..but there's sth wrong i set to 1t on bios and cpuz keeps showing me 2t

[jugeen]

don'z belive CPU-z. if you set 1T they clock 1T. the difference is measurable.

running mine at 1850 7 6 5 18 with 1,9 on my p5k3..but there's sth wrong i set to 1t on bios and cpuz keeps showing me 2t

[|SiLA|]

good i should try to run some test bandwidth of the rams to see the diffference then

here's a screenie

[saaya]

so is it just cpuz?
if yes then lmk and i can ask franck to have a look at it.

[|SiLA|]

so is it just cpuz?
if yes then lmk and i can ask franck to have a look at it.

i'll try tonight setting manually on bios 1t and 2t if there's actually real difference or not with everest so might be a buggy mobo or bios

[stone_cold_Jimi]

Having a little play with mine for a while.

Q6600 G0 / Intel HSF 400x8
Asus P5K3D
Cellies @ 1600 / 7-6-5-18 1T (uncooled)

Primed for 30 minutes til the CPU hit 80C lol, Cellies got warm too at 1.8v. Then I started dropping the vdimm and got down to 1.65v stable, SPi 1M 15.75s. Windaz fell over at 1.6v, so stability must lay between 1.6 - 1.65. That's quite tantalising, hope it scales when I start to push them a bit with some cooling.

[webwilli]

my cellshock DDR3 arrived this morning





but no DDR3-Board

[saaya]

Having a little play with mine for a while.

Q6600 G0 / Intel HSF 400x8
Asus P5K3D
Cellies @ 1600 / 7-6-5-18 1T (uncooled)

Primed for 30 minutes til the CPU hit 80C lol, Cellies got warm too at 1.8v. Then I started dropping the vdimm and got down to 1.65v stable, SPi 1M 15.75s. Windaz fell over at 1.6v, so stability must lay between 1.6 - 1.65. That's quite tantalising, hope it scales when I start to push them a bit with some cooling.

definately use the black spots and bump up the volts in 0.05v steps
if it doesnt scale or doesnt scale "properly" switch the sticks around

my cellshock DDR3 arrived this morning
but no DDR3-Board

are you getting a blitz, p5k3 or dq6?

[webwilli]

are you getting a blitz, p5k3 or dq6?

I´m waiting for Asus P5E3 Deluxe