DFI ""LT"" P35-T2R~~~No Transpiper Version

**Praz** · 09-16-2007, 06:55 PM

Originally Posted by RLM

Forget the transpiper. Rather than that, what about existing customers with the UT, who want to watercool. Is the mosfet heatsink as per the LT going to be available?

Thanks.

RLM

From what I've been told the Thermalright HR-09U TYPE3 is still on schedule for end of month release. Should have one within the next two weeks. Will post results.

**Brother Esau** · 09-16-2007, 07:20 PM

I don't know my personal opinion is that the Full version with the Trans piper is very well thought out and very nice indeed. Perhaps a secondary separately sold trans piper for south bridge would be very nice add on also seeing how the electrical end of things pretty much shuts down 2 of the working slots when in X4 mode.

Good to see DFI doing something again though

**~~turtletrax~~** · 09-16-2007, 07:31 PM

This is exactly what I wanted to see. Now I know what board to get

**bigdaddy25fb** · 09-16-2007, 08:43 PM

At least DFI listens to its customers...unlike a few other companies out there...

**Retro** · 09-16-2007, 09:20 PM

This version makes it a lot easier to construct a Thermalright city without having to hack up heatpipe assemblies

**Raja@ASUS** · 09-16-2007, 09:36 PM

bios info being updated as we can...

http://csd.dficlub.org/forum/showthr...?t=3765&page=2

**Solarfall** · 09-16-2007, 10:44 PM

damn would have bought this this instead of the transpiper version

can those heatsinks bought independently ???

**1Day** · 09-16-2007, 10:50 PM

Good board either with or without the transpiper - would have preferred the without version but I am not complaining. For the simple reason that unlike both my Asus motherboards I have no need to volt mod or to do any kind of mod to get the max out of the tech that I have at my disposal. And as was correctly stated DFi do seem to listen and more importantly adapt their products to what consumers are saying.

My one gripe is that I would like to see their products be more speedily introduced into the market but for that to happen tier one mobo manufacture status would be needed to be granted to DFi.

**jimmyz** · 09-16-2007, 11:05 PM

Originally Posted by 1Day

My one gripe is that I would like to see their products be more speedily introduced into the market but for that to happen tier one mobo manufacture status would be needed to be granted to DFi.

they are teir 1 in my book.lol

**~~emoners~~** · 09-16-2007, 11:14 PM

Originally Posted by Retro

This version makes it a lot easier to construct a Thermalright city without having to hack up heatpipe assemblies

wish i waited for this one

**WiTcHkInG** · 09-17-2007, 10:50 AM

I guess us lucky brits will see this around january

**Aldy402** · 09-17-2007, 10:53 AM

this is exactly what i was waiting for

i could replace the NB and SB with some MCW30s and not have to spend any extra money on more heatsinks..

but i also think this should be in the 160-180 range

**Jodiuh** · 09-20-2007, 02:21 PM

Originally Posted by Retro

..to construct a Thermalright city...

AndreYang:
Any idea on when I can build my little city?

**luihed** · 09-20-2007, 07:31 PM

Originally Posted by Bail_w

Also, you have to know not even one is benching their motherboard with LN2 etc. This is ridiculous.

Im know there's atleast 1 that is..

**Raja@ASUS** · 09-20-2007, 07:40 PM

some more LN2 action here, (using the search function is not too hard Bail_w)...

http://www.xtremesystems.org/forums/...d.php?t=159440

http://www.xtremesystems.org/forums/...d.php?t=157953

highest 3d bench I've seen...

http://www.xtremesystems.org/forums/...d.php?t=157959

Now tell me this is not a impressive ddr2 board @ sub zero....

**wedfighter** · 09-20-2007, 11:52 PM

Originally Posted by luihed

Im know there's atleast 1 that is..

make it two

**elec999** · 09-21-2007, 04:23 AM

Good Looking board.
Thanks

**zodduska** · 09-21-2007, 05:41 AM

anyone know if this is for sale anywhere in the US yet?

**Jodiuh** · 09-21-2007, 01:51 PM

Those boards in the pics both have the transpiper...

I'd really love to wait for this version as reapplying paste on a separate heatsink sans heatpipe would be much easier. 2 bad they're not silver tho.

C'mon DFI!!

EDIT: fixed

**Freez** · 10-01-2007, 02:28 PM

Originally Posted by zodduska

anyone know if this is for sale anywhere in the US yet?

Anybody?

**nfm** · 10-01-2007, 02:32 PM

http://www.motherboardpro.com/DFI-La...775-p-369.html

**Freez** · 10-01-2007, 02:37 PM

Originally Posted by need.for.mhz

http://www.motherboardpro.com/DFI-La...775-p-369.html

Just saw, I bought the one they had in stock

**pak** · 10-01-2007, 02:38 PM

$240! Good price, but I gues they valued that transpiper at $60?

--pak

**Brother Esau** · 10-01-2007, 03:03 PM

Originally Posted by OCFX

Yeah sad DFI prices are too HIGH

At least that green with black ownz xD

You would not be saying that if you owned this "Monster Overclocker"

@Freez......Gimme some of the L.S.D.25

**Jodiuh** · 10-01-2007, 08:32 PM

Originally Posted by need.for.mhz

http://www.motherboardpro.com/DFI-La...775-p-369.html

I don't care for the black, but wasn't planning on using the transpiper. Thanks! Hopefully they have enough in stock when I order this Fri.

(no one else buy, ok?)

Thread: DFI ""LT"" P35-T2R~~~No Transpiper Version

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions