Quad Core OC Database

[njkid32]

Whats your max 100% cpu stress clocks?

[FabricioGS]

You're asking for me? Haven't tested yet, I'm having some problems with temperature.

[NaeKuh]

L720B066
1.44Vcore Real
415x9 3.737



This is my 24/7 usage.

Board: Asus P5K-DLX
Cooling:
ApogeeGTX
PA120.3
IWAKI RD-30


I think you should honestly only take primes longer then 3 hours. More the better. Quads tend to fail at 2-3 hours during prime, if the voltage is too low. Otherwise i'll pop my 3.825 which failed at 2 hours 30 min @ 1.46Vcore real.

[ncsa]

Q6600 G0 - L723A924 - 4.41 GHz Wp 1024m stable - Vapochill LS [AC] stock - 1.68v (1.63-4 load) - Abit IP35-Pro stock - OP1000 PSU - by - ncsa

And the meaningless screenshot CPUz 498x9

[CraptacularOne]

1) G0
2) L723A977
3) http://valid.x86-secret.com/show_oc.php?id=241561
4)
5) Air Cooler - Coolermaster GeminII + 2x120mm fans
6) 1,4250v bios, 1,4000v real
7) Asus P5K Deluxe + Crucial Balistix PC8500 @ 1125MHz 5-5-4-12

I can't add this unless you get me a 4 cores running 100% load. Only 2 cores running does not make it stable

[rbsmontemor]

1) G0
2) L723A977
3) http://valid.x86-secret.com/show_oc.php?id=241561
4)
5) Air Cooler - Coolermaster GeminII + 2x120mm fans
6) 1,4250v bios, 1,4000v real
7) Asus P5K Deluxe + Crucial Balistix PC8500 @ 1125MHz 5-5-4-12

Use Prime95....already told you on ForumPCs

Rbs.

[FabricioGS]

I can't add this unless you get me a 4 cores running 100% load. Only 2 cores running does not make it stable

Sorry, I'm still a noob on quad cores :P

Will post later using Prime95, let´s see how far I can get.

[CraptacularOne]

List updated

@ Viper.Br, it's OK we we're all newbs at one time

[BNDMOD]

1) B3
2) L634A700
3) Validation: http://valid.x86-secret.com/show_oc.php?id=241932
4) 3.720Mhz

Prime95

[no_n|ck]

1) B3
2) L634A700
3) Validation: http://valid.x86-secret.com/show_oc.php?id=241932
4) 3.720Mhz

Prime95

9min of prime???

yea, stable as rock

[CraptacularOne]

1) B3
2) L634A700
3) Validation: http://valid.x86-secret.com/show_oc.php?id=241932
4) 3.720Mhz

Prime95

err, can you get me a shot of it running for a little longer please

[Ic3man]

CPU : Q6600 G0
Week : L23B010
Clockspeed : 423x9 = 3.807 ghz
Cooling : D-Tek fuzion
Vcore : 1.52
Motherboard : Asus Blitz Formula

http://valid.x86-secret.com/show_oc.php?id=242033

12 hours Prime 95 small fft's stable.

[911us]

got my Q6600 L723A924 today,will test and report soon

[GripS]

CPU : Q6600 G0
Week : L23B010
Clockspeed : 423x9 = 3.807 ghz
Cooling : D-Tek fuzion
Vcore : 1.52
Motherboard : Asus Blitz Formula

http://valid.x86-secret.com/show_oc.php?id=242033

12 hours Prime 95 small fft's stable.

God damn!!!! Sweet......very sweet. That is one hell of a chip you got there. You plan on running that 24/7??

[dpa]

CPU : QX6850 G0
Week : L724
Clockspeed : 4xxx12 = 4.8Ghz+++
Cooling : Solid Copper pot + Dryice
Vcore : 1.8v idle = 1.68v max load in 06 cpu test WITH vdrop and vcore mod
Motherboard : Asus P5K, bought P5K-E today, will test it..

Pi time is bad because of crappy memory timings; 5-5-5-15. Cpu test in 06 is low because of 6100GFX card, got 7400 with 8800Ultra when setting was 4.79Ghz.

[Ic3man]

God damn!!!! Sweet......very sweet. That is one hell of a chip you got there. You plan on running that 24/7??

Yeah. Its well within the comfort zone (temps/vcore) for me.

[vkostas]

Wee 1st post in the forums after a long time of lurking

Here is my little Q6600. Hoping for better O/C a bit later with a new mobo
and maybe some better ambient temps

CPU: Q6600 G0
FPO #: L719B278
Validation: http://valid.x86-secret.com/show_oc.php?id=242740
Cooling: D-Tek Fuzion / Laing D5(Setting 3) / Back Ice GTX 480 - Ambient Room temps : 26 - 30 C
M/B: Abit IP35-Pro
Vcore: 1.6050 Set in BIOS 1.49 - 1.50 Real under load.... this board realy droops :S hope the new P5K Premium will not

[dzeuk_ph]

High Guys!

How about max. FSB for these quads? how high can they go?

thanks!

[largon]

Q6600 G0 - L724A786 - 3.6Ghz P stable - WC D-Tek Fuzion - 1.396v - abit IP35 Pro - by --------largon

Q6600 [B]G0[/B] - L724A786 - 3.6Ghz P stable - WC D-Tek Fuzion - [B]1.396v[/B] - abit IP35 Pro - by --------[B]largon[/B] 

[Cordovader]

1) QX6850 G0
2) L723A658
3) http://valid.x86-secret.com/show_oc.php?id=242768
5) Thermalright Ultra 120 eXtreme
6) 1,3625v in bios, 1,336v idle, 1,328v full load
7) Asus Blitz Formula

4)


And some non daily oc

Air


LN2

[sam95ta]

Q6600 GO @ 3.77
L726A849
http://valid.x86-secret.com/show_oc.php?id=243080
P5K E ( pencil mod)
Noctua NH U 12
1.50 bios 1.48 actual

I just switched over from P5B deluxe.Here is my first try with this board.Will try to lower vcore.

[CraptacularOne]

List updated

@ dpa, that is one hefty result, but I'm going to need a stable shot of it running prime for at least an hour or at the very least a quad instance of Pi 32m

@ vkostas, welcome aboard

[dragonhunter]

1) Q6600 G0
2) L727A658
3) COOLER MASTER GeminII
4) 1,5675v in bios
7) Abit IP35-E

[CraptacularOne]

Gotcha dragonhunter

[RLM]

L723B284

CPU : Q6600 G0
Week : L23B284
Clockspeed : 434x9 = 3.908 ghz
Cooling : Apogee GT (Bowed)
Vcore : 1.52
Motherboard : DFI P35-T2R



RLM