Lian Li v2000 and v1200 thread

[kinghong1970]

Hey kinghong, what size of tubing are you using? Nice setup btw.

that rig was using 3/8" ID tygons...

new rig i'm working on is either 1/2" or 7/16"

cant decide yet...

[ripken204]

i have to get a good pic tomorrow when i can get some decent light in the room. check my sig for the comp specs and water specs. i spent the whole weekend getting the water cooling set up and it's soo worth it!

[terente0081]

Here's mine. LianLi V2000, Vapo and water cooled. Even this case is not big enough to hold all the components I wanted in.

[Feichti]

@ terente0081

Very Nice

i have got also three v2000 in Black @home

Case 1 Gaming PC with modded 2 Mainboard and Watercooled
Case 2 only for Watercooled Parts for Case 1

Case 3 Big Fileserver with 17 HDD's pics @ Homepage are old will update them soon

Pics you can finde @ www.hardware.feichti.com

but at the Moment Case 1 & 2 are under build and they will be looking totaly different in 1-2 Weeks. Than i will post new Pics

here some Pics from the Work






Greeds Feichti

[disruptfam]

terente0081


That's gotta be the best v2000 i've ever seen.Very well done.Can you post some more internal pics without the door both sides please.

cheers

[W.G]

For those who have cut holes in their case for cable management

Did you have to take all the inside out, and then replace/re-rivet it all again?

[lazy]

if you take literally everything out... i guess you can keep the inside cleaner
vs leaving it on and having to remove he bits that come off when your dremeling

[rsmaverick]

Greaet build terenti. I love the clean look. . Is that a matrix orbital display? Suites the case.

[DearKook]

I know its just a v1000 but its my baby. The v series Lian Li just rock. Please excuse the fan cable for the video card waiting for my panaflo replacement.

[Jodiuh]

Unbelievably cool these rigs look guys. So much prettier than my wee Stacker.

[AndyM]

I know its just a v1000 but its my baby. The v series Lian Li just rock. Please excuse the fan cable for the video card waiting for my panaflo replacement.

Nice wiring, I love a machine where the wires vanish. It seems that the application of sound insulating material really cleans up the internal appearance as well, gives me some ideas!

[lowfat]

My last V1000.

[disruptfam]

did you sand and polish the metal divider? Looks sick mirror finish.If so how long and how much of a pain in the bum was it to do.I Wanna do the same thing in my v2000b.Ne guides on how to do it?

cheers

[lowfat]

did you sand and polish the metal divider? Looks sick mirror finish.If so how long and how much of a pain in the bum was it to do.I Wanna do the same thing in my v2000b.Ne guides on how to do it?

cheers

Yes i sand and polished it. It wasn't very hard just time consuming.

I started with 1000 grit, then moved to 1500 grit, then 2000. This takes 4-5 hours to get it smooth enough. Always wetsand and make sure the paper is clean/changed often. After all that then I used 3M rubbing compound to fininsh it off.

[Catul]

I know its just a v1000 but its my baby. The v series Lian Li just rock.

Very very nice - excellent cable management!! How/where did you tuck the PSU cables, I didn't realize there's room behind the motherboard tray? What sound dampening material are you using, did you find it made a noticeable difference considering the vent holes all over?

[DearKook]

Thanks

The sound dampening stuff was from performance PC (Noise Pax Sound Dampening Material) the sound dampening abilities was really just a side benefit.. My main goal was to cover up those holes to give it a cleaner appearance, I never ran it without the stuff so I'm unsure how much difference it makes.

Here is a couple shots of the cable management on the backside of the case. Hehe just noticed a cable I should zip tie...

[manu]

terente0081


That's gotta be the best v2000 i've ever seen.Very well done.Can you post some more internal pics without the door both sides please.

cheers

I think the same, can you post more pics and specificacions about your systems.
Thanks a lot

[disruptfam]

I think the same, can you post more pics and specificacions about your systems.
Thanks a lot
__________________

it's so clean he must of cut into the mobo or something my v2000 isn't half as clean as his.

[AndyM]

Here is a couple shots of the cable management on the backside of the case. Hehe just noticed a cable I should zip tie...

Heh, I see you like zip tie anchors as well. I'm really liking the V1000 more and more...need reason for 2nd computer <thinking hard>. Great job, and enjoy the machine!

[disruptfam]

new pic's .....

[MikeMK]

disruptfam - Nice rig mate. Im thinking of getting a V2000b and want to put a tripple rad in the bottom like you have. However, from the pics ive seen there are no vents at on the side of the case to draw air through... can you confirm this is the case? Did u bother adding any in yourself?

Also, i see you have two loops - in an ideal world I would like to do this... its not clear from your pic where the what or where the 2nd rad is?

[Dark Prodigy]

Few pics of my V1200. The V2000 seems to be more popular.

[Xenogias]

Anybody having problems with the rail that holds the sides of the case on vibrating and producing noise? I am experiencing this with a V2000B. I have an eheim 1250 in the bottom which is bolted down through a pad of neoprene and a bunch of 120mm fans...

[disruptfam]

disruptfam - Nice rig mate. Im thinking of getting a V2000b and want to put a tripple rad in the bottom like you have. However, from the pics ive seen there are no vents at on the side of the case to draw air through... can you confirm this is the case? Did u bother adding any in yourself?

Also, i see you have two loops - in an ideal world I would like to do this... its not clear from your pic where the what or where the 2nd rad is?

Well atm i have no doors on my v2000,i'm in the process of cutting them and putting moder's mesh for airflow.

I have two slimline triple rads in the bottom section. Originally had two larger triple rads would not fit.So i squeezed two smaller 3x rads.I had to sacrafice performance to fit both of them in... But i'm very happy with my project...

here's a pic



Dark prodigy i love the how to did the mid section to a mirror finish,I'm considering doing the same

[disruptfam]

Anybody having problems with the rail that holds the sides of the case on vibrating and producing noise? I am experiencing this with a V2000B. I have an eheim 1250 in the bottom which is bolted down through a pad of neoprene and a bunch of 120mm fans...

No have been algud for me....