Post your X2 revision F3 OC and stepping

[SOLDNER-MOFO64]

sounds like a plan buddy.....you'll take almost 10k in NUCLEARUS with that bad-boy, if not break the 10k.

winrar should see a good boost too......not to mention a 3D MARK 06 cpu score of 3k??????

[mAJORD]

heeh funny you say that, Just scraped 10020 after a couple of runs will post ss soon.

and a 22.12 Wprime, but stupid me decided to push higher (and failing.. errors at about 88% ) instead of screenshot, now I have to try and get it again.

Nevermind, HWBOT seems to be down anyway so not like I can submit a score.. what's with it allowing you to finish the calc with errors too? essentially means you can't post an SS since it can be totally flawed :O

[Mad_Man]

22.12 Wprime 32M??? aint that a little too slow?
dunno, but i got 23.2 at 3418mhz

but that nuclearus score is insane, thats fast

can you do all the tests in PCmar05?

[SOLDNER-MOFO64]

heeh funny you say that, Just scraped 10020 after a couple of runs will post ss soon.

and a 22.12 Wprime, but stupid me decided to push higher (and failing.. errors at about 88% ) instead of screenshot, now I have to try and get it again.

Nevermind, HWBOT seems to be down anyway so not like I can submit a score.. what's with it allowing you to finish the calc with errors too? essentially means you can't post an SS since it can be totally flawed :O

lmao......just scrapped a 10,020 run? You're a bloody tease you are

Nice one mate.....can't wait to see your end result...

AMD GOODNESS

edit...

Just noticed scraped not scrapped...my bad..lol

[hstuehmeyer2000]

perhaps CAS3 is the answer

then this is the ram you need

that oc is with 2.2v
here is the ram at newegg, http://www.newegg.com/Product/Produc...82E16820208283

[mAJORD]

madman, yeah it is rather slow i'm thinking too, can't say I know why, it's at 3.8ghz!

I just tried it at 3.414Ghz and I got 25.1sec , Love to know what you're doing :O

SOLDNER, no way i was scrapping that score, more like I wasn't giving up after missing 10k by 1 or 2 digits


hstuehmeyer2000 , now THAT's good ram, that and/or you have a friendly mem controller / have magic fingers with your DRAM settings

[Mad_Man]

madman, yeah it is rather slow i'm thinking too, can't say I know why, it's at 3.8ghz!

I just tried it at 3.414Ghz and I got 25.1sec , Love to know what you're doing :O

SOLDNER, no way i was scrapping that score, more like I wasn't giving up after missing 10k by 1 or 2 digits


hstuehmeyer2000 , now THAT's good ram, that and/or you have a friendly mem controller / have magic fingers with your DRAM settings

i tell you something about wPrime from my experience...
it loves two things:
realtime priority AND Vista Ultimate 32 with stopped almost all services and processes (except explorer, that makes it worse).
and my 1024M score is smth more than 12min

and thats with CL5, as i thought it will crash at cl4... when i discovered it will run at 480mhz cl4, i was already 1st 5200+ on hw_bot in wPrime lol

btw, Vista, with stopped services,processes can be fast. in reality, some benches are faster on vista than on my Xp 32 or 64bit install.
dunno, everyone swear on vista and i love it

Edit: wish i had that ram, on exactly same speed, i need 4-4-4-10 timings 2.275Vmem

[mAJORD]

well there you go, it's XP at fault thanks for the tip

never would have thought that to be honest, but.. not only Wprime, it seems winrar benchies run best on VISTA too.. at least that's the impression i get browsing the Rar bench thread... very interesting. For the record, again 1812Mb/s @ 3.85ghz, certainly lower than expected when compared with vista results .

Me think's a copy of vista may just be worth a try this week.

So on that note i'll stop at nuclearus for now , here you go SOLDNER

Nuclearus 10020 Mark @ 3824Mhz DDR2-546Mhz 4-4-4-6-11 2T

[hstuehmeyer2000]

hstuehmeyer2000 , now THAT's good ram, that and/or you have a friendly mem controller / have magic fingers with your DRAM settings

thats with a brisbane to, i am sure a windsor would do much better, and its the board thats magical, i used the dd533 divider, i have never gotten my ram that fast at cas 3 on any other board
edit: thought the mobo was in the screenshot, I got that oc on a DFI LP 590

[SOLDNER-MOFO64]

well there you go, it's XP at fault thanks for the tip

never would have thought that to be honest, but.. not only Wprime, it seems winrar benchies run best on VISTA too.. at least that's the impression i get browsing the Rar bench thread... very interesting. For the record, again 1812Mb/s @ 3.85ghz, certainly lower than expected when compared with vista results .

Me think's a copy of vista may just be worth a try this week.

So on that note i'll stop at nuclearus for now , here you go SOLDNER

Nuclearus 10020 Mark @ 3824Mhz DDR2-546Mhz 4-4-4-6-11 2T

wooohoooooo a 10K AMD

very very nice indeed. congrats on being the first guy to pull 10k with an AMD DC mate....definately the top AMD DC out there at the moment. Top marks dude

[mAJORD]

In tune with everything else in my life, snuck in by just one day.. i.e K10 quad NDA lifts tommorow.. not only may (emphasis on may, I personally don't expect K10 pi to be too impressive at all) the pi WR be smashed by some review site, but who knows they may even run nuclearus

[FlawleZ]

Wow. Truly impressive results mAJORD. I didn't catch it if you mentioned it already, but which stepping did you receive on your 6400+? I want to see SP1 19.xxx with that chip, I know its possible!

[mAJORD]

Hey Flawez

It's a CBB8F 0722 TPMW

SAD's chip: ACB8F 0723 with a "damn.. forgot the last part.. i think SPWM"

[Mad_Man]

well there you go, it's XP at fault thanks for the tip

never would have thought that to be honest, but.. not only Wprime, it seems winrar benchies run best on VISTA too.. at least that's the impression i get browsing the Rar bench thread... very interesting. For the record, again 1812Mb/s @ 3.85ghz, certainly lower than expected when compared with vista results .

Me think's a copy of vista may just be worth a try this week.

and a 22.12 Wprime, but stupid me decided to push higher (and failing.. errors at about 88% ) instead of screenshot, now I have to try and get it again.

have you tried Vista? this morning i pushed a little harder, and got this one:

3510mhz@1.56V, ram at 501 4-4-4-12 2T
Pi : 24.07s
wPrime32: 22.259s
winrar: bluescreen

havent tried PCmark as i have crappy OS HDD, subscores are good, but that HDD just kills me...
dont you know? whats better?
raptor or 2*WD160YS in raid?

[mAJORD]

wow, wprime loves the vista :O

Pi doesn't look as crash hot on it however ,

and no I havent tried it yet, been too much K10 stuff flying around

[Mad_Man]

wow, wprime loves the vista :O

Pi doesn't look as crash hot on it however ,

and no I havent tried it yet, been too much K10 stuff flying around

yes, wPrime loves vista, but theres huuuge, and i mean huge difference between all day vista and vista for bench.
if i stop many services and close 20processes, lol, i have 65+ processes running now, it saves me a lot of time in wPrime.

what are you getting in pi at ~3500?

[LIKMARK]

Here is my sp1 for comparison, this is on my Zalman 9700LED

Sorry for the size..

[Mad_Man]

Here is my sp1 for comparison, this is on my Zalman 9700LED

Sorry for the size..

nice, and wPrime?
just curious about vista to xp comparison

[LIKMARK]

Haven't tried too much Wprime as you see. This is one of the few runs I've done, some time ago. Quite crappy time actually. I'll make a run later this evening. Any good wintweaks?

[TiTON]

Hey Folks,

Sorry for the lack of update. I have been so busy w/ RL

Anyway.. I wanted to share a quick Spi 32mb run. FOr somereason I only have the 19min screen shot. I was actually able to get like 18m5x's.. which is still ike 10 sec off the overall WR. I will try again when I get a chance.

Sorry about the big image,



SAD

[Turrican]

wow, great result

[DaRoN]

Hi. I have the CCB6F 3800+ too.

I'll post here some scores later. Now I must burn'in the Foxconn mobo ;]

[ea6gka]

kinda bored to continue , looks like it is stable there dont ya think? is the Vcore good for a CCB6F?

(thats on air btw)

[mAJORD]

Lookin good SAD, if only you could get that RAM up to speed and it'd be yours i'm sure of it ! Get some crucial!

[BadNizze]

This tread is looking better and better every time I visit! Congratz on all WR´s, Getting my 6400+ Black in 4 houres, can´t wait! hoping it works ok in my DFI 570 Ultra!