Quote Originally Posted by mnaz View Post
Nice crossg and temps still look good. Maybe I'll give mine another go when it cools down a bit here. What are your other voltage settings?
Thanks. I should have stated that this speed is not useable for me becuase of the fluctuating ambients, it's 22 deg now but by this afternon it will probably be around 25 deg and that temp will probably push my core temp over 70. I think 3.6 is going to be my 24/7 clock.

Anyways my voltages are:
PCIE Freq: 101
Vcore: Bios 1.5375v / 1.5040v Load
Clock Over-charging Mode: Auto ( haven't a clue what this does)
CPU Voltage reference : 0.63x
CPU PLL Voltage: 1.60v
Dram Voltage: 2.25v
FSB Termination Voltage:1.40
Northbridge Voltage: 1.55v
North bridge Voltage reference: 0.67x
Southbridge Voltage:1.20v

Dram Static read control: Disabled
Transaction booster: Disabled
CPU Voltage Damper: Enabled.
All the other usual stuff disabled.
Going to switch over to Vista and see if I can get 3.6 stable with the same settings as I use in XP. About 20 more proccesses running in Vista.