Testing my new 6850 on the QuadGT.
Batch is L720A958, pack date 07/31/07.
The board is giving me some booting problems, which I never had before (4 months of usage with a Xeon 3050 @ 3600Mhz).
So far, I'm testing 3900Mhz, 1.50V (1.55V in bios), all watercooled with Dtek Fuzion, PA120.3 etc....)
Rig #1
Gigabyte P67A-UD4 trying to figure out this POS board
2600k @ ?????
2x2Gb GSkill RipJaws-X 1333 (7-7-7-21)
ATI 5850
Coba Nitrox 750W
Watercooled with HK 3.0 CU, Watercool GPU-X³ 5870 Nickel, PA120.3, Laing Ultra with XSPC top
Rig #2
DFI UT P35-T2R (0317 bios)
E8200 @ 4000 (1.216V) / 4100 (1.248V) / 4200 (1.296V) / 4300 (1.344V)![]()
2x2Gb Chaintech Apogee GT PC2-8500
Powercolor 4870
Corsair 520HX
Watercooled with HK 3.0 CU, EK-FC4870, Feser tripple, Laing Ultra pump
whoops read your last post incorrectly i thought you meant this is your batch and here are your numbers/clocks.. hehe
How about this on Kayl Black FrozenSS 1/4HP!
System
- E6850 L723A347
- Kayl Black FrozenSS 1/4HP
- Asus Commando 1501 bios flashed from 1404 bios
- 256MB BFG 7800GTX stock hsf
- 2x1GB Team 6400C3 Micron D9GMH cooled by 3x 60x25mm Sunon 23.5cfm Maglev fans
- 160GB Seagate 7200.7 SATA
- Pioneer DVR-08 Burner
- Sony FDD
- 620W Corsair HX620 Modular PSU
- WinXP Pro SP2
4707Mhz at 1.680v
4728Mhz at 1.656v
Both cores enabled with around -36.8C evap load for super pi 32M. Probably have 100mhz more headroom with more vcore and/or disabling one core
Some wPrime v1.51 action @4680Mhz and @4703Mhz at 1.688v
@4680Mhz at 1.688v
@4703Mhz at 1.688v
@4800Mhz at 1.816v
Max CPUZ Validation at 4800Mhz at 1.816v (next vcore step up from 1.696v due to bios vcore bug as in between vcore settings result in 1.62v vcore heh)
3dmark benchable @4608Mhz at 1.696v
3dmark06
http://service.futuremark.com/compare?3dm06=2939813
![]()
---
Bookmarks