Quadzilla Qx6850@ln2

[BeardyMan]

With credits to team japan i assume

[G H Z]

If I make a set of wheels do I have to credit the cave man who made the first one

Anyway the F1 is square, Max Neo is obviously a rectangle

[Kinc]

cool design.
but why did you change to the square profile?

More volume and greater base areal is my best guess. Really love the design!

@Vince. How can one become a owner of one?

[Cordovader]

Ok here ya go...the quadkilla

Awesome work Vince

[hipro5]

Gee ! .........They are just beautiful Vince.....

[Harshal]

Really nice looking pots, Vince!!
Now I know what were you saying
and I like it more as F1 is da craze... for me atleast

[k|ngp|n]

Been working on original concept for this unit since october of 2006 .
This unit is all about SPEED in every sense. Every design aspect of the unit is there for a reason. It has fast pulldown, fast temp recovery, very fast action from pours, the ability to run 3dmark game tests at different temperatures with quad at very high speeds. The base is what this unit is all about. There is more to it than just the lettering It is massive and provides awesome control. It is not the kind of unit that you run 3dmark2006 with full of LN2 and just sit back and watch. You are in full control every second of the way . It is very reactive. An LN2 benchers dream IMO.

With credits to team japan i assume

Team Japan has always gotten credit from me on every container I have ever made . Anyone who has ever built a container made from solid copper should give credits to team japan as those guys are the pioneers .
Max neo is a killer unit, never seen the base on it though.

[oanvoanc]

Team Japan has always gotten credit from me on every container I have ever made . Anyone who has ever built a container made from solid copper should give credits to team japan as those guys are the pioneers .
Max neo is a killer unit, never seen the base on it though.

totally agree

but why did you choose an asymmetrical design on the base?

i dont wanna question your experience in extreme-cooling, but what about an O instread of the F with a '+' inside?

bad idea?

[zakelwe]

Nice to compare these pots to a history of pots that Sampsa showed recently to give an indication how you guys have progressed over the years. Amazing what the homebrew guy can do.

In design terms and comparing to a motorbike these are like the Ducati Desmodici RR rather than F1, though I guess that would not fit on the base

Regards

Andy

[Gautam]

totally agree

but why did you choose an asymmetrical design on the base?

Cause he wanted to.

[Harshal]

Been working on original concept for this unit since october of 2006 .
This unit is all about SPEED in every sense. Every design aspect of the unit is there for a reason. It has fast pulldown, fast temp recovery, very fast action from pours, the ability to run 3dmark game tests at different temperatures with quad at very high speeds. The base is what this unit is all about. There is more to it than just the lettering It is massive and provides awesome control. It is not the kind of unit that you run 3dmark2006 with full of LN2 and just sit back and watch. You are in full control every second of the way . It is very reactive. An LN2 benchers dream IMO.

Ohh... I think I know what you mean by "you are in full control"... I had a tough time in Singapore with pouring LN2 for our asian 3D record run in July using Xu Gang's D-ICE pot as the Dragon-pot Sham had, had its hold-down plate screwed... still according to Sham, I did a decent job @ keeping temps around -95c... but I surely learned dat one has to be not too fast yet not too slow to maintain da temps, specially during those CPU tests.
So when you say its "LN2 bencher's dream". Its da Bottom-LINE for guys like me. Also, considering its characteristics I now really feel its named aptly!!

[Fixxxer]

Sexy quadkilla, Vince

[Planet]

Amazing looking pots Vince. I assume those were milled? I got some new ideas I am working on at the moment with sand casting.

[nCrusader]

Now that's some true Cu pr0n. net weight?

[BeardyMan]

Been working on original concept for this unit since october of 2006 .
This unit is all about SPEED in every sense. Every design aspect of the unit is there for a reason. It has fast pulldown, fast temp recovery, very fast action from pours, the ability to run 3dmark game tests at different temperatures with quad at very high speeds. The base is what this unit is all about. There is more to it than just the lettering It is massive and provides awesome control. It is not the kind of unit that you run 3dmark2006 with full of LN2 and just sit back and watch. You are in full control every second of the way . It is very reactive. An LN2 benchers dream IMO.



Team Japan has always gotten credit from me on every container I have ever made . Anyone who has ever built a container made from solid copper should give credits to team japan as those guys are the pioneers .
Max neo is a killer unit, never seen the base on it though.

Well i think the pot is xtremely cool and i have no doubt that it performes like you say..however i have to admit that i was expecting a total orginal design
Have you also tested dryice with it?(lol do you even stil use that )

[Stapler]

^Internals are nothing like the Max Neo. Yeah the outside shape is the same, but their are only so many shapes copper comes in. I don't think it would be worth using with dry ice either.

[PanteraGSTK]

Very nice. More surface area

[F.O.G.N.A.]

Nice pot k|ngp|n

You' re always N° 1

[Oliver]

That is a really cool pot you have made there Vince .

[Solarfall]

damn that is one great looking container

[k|ngp|n]

Congratz on the new 2006 score with the blitz extreme Shamino, breathing down my back! That score/cpu speed is looking killer.
Was really looking forward to you re-running that setup as were alot of other peeps...check out the gt1/gt2 now at 140mhz more on cpu at 5250mhz and nearly same card clocks as kinc/sham run .

Looks like you got the ln2 DOWN now and prolly 27k will go down real soon for you no doubt!:
http://service.futuremark.com/compare?3dm06=2922689

I am benching for it this week as well on SLI....good luck bro.

[hipro5]

Congratz on the new 2006 score with the blitz extreme Shamino, breathing down my back! That score/cpu speed is looking killer.
Was really looking forward to you re-running that setup as were alot of other peeps...check out the gt1/gt2 now at 140mhz more on cpu at 5250mhz and nearly same card clocks as kinc/sham run .

Looks like you got the ln2 DOWN now and prolly 27k will go down real soon for you no doubt!:
http://service.futuremark.com/compare?3dm06=2922689

I am benching for it this week as well on SLI....good luck bro.

He could break EASY 27k marks Vince with the CPU that high and CF BUT I can't say how.....

[LardArse]

kingpin!!! you give no chance to catch up my man
yea, i didnt know how it scales until I played with it more, though its still different from sli, the cpu speed only gave me boosts in cpu score not so much in gt unlike sli while i had to rely on card clocks. Mobo is pretty much strained with oced overvolt xfire its much tougher to do 5.3G on it in full array.
heyif u compare our scores its very coincidental that graphics power is almost identical as you can see in GTs, but the cpu score just blows in the ati setup.

[dinos22]

He could break EASY 27k marks Vince with the CPU that high and CF BUT I can't say how.....

AMD CPU?
j/k hehheh

[LardArse]

He could break EASY 27k marks Vince with the CPU that high and CF BUT I can't say how.....

My greek friend, whisper it to my ears damn... u'll be gettin microns ery soon now won't ya? :P