8800Ultra 3dmark numbers

[michaLcoughliN]

Hmm firelight very nice whats ur 3dmark06 scorE?

[FireLight]

Hmm firelight very nice whats ur 3dmark06 scorE?

My version of 3dmark06 is old and for that i can't up on orb

[massman]

download the newer version?

[Bei Fei]

I will post soon I ordered the XFX 8800 Ultra 612 version. It should be here early next week.

Well I am rather disappointed in my cards. One showed up DOA and the other doesn't clock well. I can get to 736/1180, anyhow my first untweaked 06 score is a blistering 13648 with a single card. I will post some shots when I get my other card and do some sli runs. I also ordered a q6600 hopefully a G0.

[FireLight]

download the newer version?

Yes,and i have QX now...finelly i can test stock vapo whit quad

p.s



new version 06...but 162.18 is not apruved

[Sampsa]

Warmup with QX6850 under DI and Ultras with default cooling:

http://service.futuremark.com/compare?3dm06=2758909

Next stop: 23k

[FireLight]

Warmup with QX6850 under DI and Ultras with default cooling:

http://service.futuremark.com/compare?3dm06=2758909

Next stop: 23k

Nice start Sampsa QX under stock vapo?Say something,vcore,temps dont keep for slef.

[Gautam]

He says DI right in the post you quoted...

[NightRaven]

haha very nice fellas. i;m waiting for my damn ultra to come back from rma. thank God i didnt DICE it...RMA would be busted to hell then..

anyway i was just a few points shy of 15k 3d06 with my Q6600 at a mere 3ghz..bahh.....come back faster dammit.

[FireLight]

He says DI right in the post you quoted...

My mistake,sorry.Now think cpu have more potential under DI

[Sampsa]

Small improvement to total score. Unfortunately my other MSI NX8800 Ultra died and I had to use EVGA GeForce 8800 Ultra as other graphics card. Because of this I had to drop mem speed from 1200 to 1165 MHz. I also had some issues with GPU speed and unfortunately managed to reach only 825 MHz:





http://service.futuremark.com/compare?3dm06=2822111

[BeardyMan]

What stepping sampsa?
I saw that MM pulled of 4.9ghz quadcore on dryice 3d06 stable...
Might wanne find the same chip

[Sampsa]

What stepping sampsa?
I saw that MM pulled of 4.9ghz quadcore on dryice 3d06 stable...
Might wanne find the same chip

MM is running Asus Blitz Formula motherboard based on P35 chipset which is much better for high CPU clocks compared to nForce680i SLI motherboards. His CPU is probably also better than mine (G0 ES week 13). I'll give P35 + Radeon HD 2900 XT CrossFire a try as soon as I get a pair of them.

[BeardyMan]

MM is running Asus Blitz Formula motherboard based on P35 chipset which is much better for high CPU clocks compared to nForce680i SLI motherboards. His CPU is probably also better than mine (G0 ES week 13). I'll give P35 + Radeon HD 2900 XT CrossFire a try as soon as I get a pair of them.

Lol second time i fail to see someone is running quad on 680i, my bad srry

wel good luck then

[Gautam]

You're all set up Sampsa, all you need now is some juice.

[justin_c]

i have two ultras on my dfi 680i lt, clocked at 411x9 about 680/1181 for the gfx. on air.
im trying to push 20k; is it the gfx or the cpu, as i can do 3.9 ghz 3dmark06 stable.

[justin_c]

i am all that closer to 20k almost there...but i think there is a issue with the newer unapproved nvidia drivers. the difference from 3.9ghz to 3.95 ghz plus an extra 20mhz boost on each pcie slot only gives about an extra 300 marks, maybe the older approved drivers would do better?
pcie 120mhz, 3.95 ghz q6600, 680/1181

[justin_c]

just 363 marks away; i don't understand how http://service.futuremark.com/compare?3dm06=2397374 got that with only 3.85 ghz, 100mhz less than me.
maybe its cause im using windows xp 64?

[Sampsa]

just 363 marks away; i don't understand how http://service.futuremark.com/compare?3dm06=2397374 got that with only 3.85 ghz, 100mhz less than me.
maybe its cause im using windows xp 64?

Might be Windows XP 64 or some driver settings (adjust to high performance) or Rivatuner-settings (LOD). Keep using FM Approved drivers since otherwise your result isn't valid.

[eva2000]

Small improvement to total score. Unfortunately my other MSI NX8800 Ultra died and I had to use EVGA GeForce 8800 Ultra as other graphics card. Because of this I had to drop mem speed from 1200 to 1165 MHz. I also had some issues with GPU speed and unfortunately managed to reach only 825 MHz:

http://www.io-media.fi/sampsa/tests/qx6850/01.jpg[/img]

http://www.io-media.fi/sampsa/tests/qx6850/3dmark06_23333.png[/img]

http://service.futuremark.com/compare?3dm06=2822111

sweet score there! shame about the card dying

[Sampsa]

sweet score there! shame about the card dying

Actually its still alive but there are some corruption on screen, maybe it'll work some day

[michaLcoughliN]

On the 8800ultra is there a Wall ? For some reason mine doesnt like 680/1080

I got it upto 660/1080 Any recommendations? Or am i screwed without doing soldering mods to the gpu.?

[Sampsa]

On the 8800ultra is there a Wall ? For some reason mine doesnt like 680/1080

I got it upto 660/1080 Any recommendations? Or am i screwed without doing soldering mods to the gpu.?

Next step is better cooling for GPU/Memory and after that more voltage with mods

[massman]

Actually its still alive but there are some corruption on screen, maybe it'll work some day

Artifacts?

Maybe it's just one of the memory chips that died.

[youngpro]

im getting some strange fuzz on the screen during boot and during program loads with one of my 8800 cards, although it benches/clocks perfectly and my scores are the same, it happened after a 7 hour dice benching session, im unsure exactually what the problem is but its not causing any benching issues, anyone had similar?