Hey Ace your a saint and definitely much more patience than I
Well its been 11 days now since I paid for my quad G0 FPO/Batch #L725A903 and still waiting (dont ask) and really looking forward to installing into my IP35 Pro with Vdroop mod, thanks to those who answered my queries and will post some ss later this week
lots and lots of cores and lots and lots of tuners,HTPC's boards,cases,HDD's,vga's,DDR1&2&3 etc etc all powered by Corsair PSU's
Well I get this. I loaded the driver with F6 and I hit 'S' to pick the right one. No luck.
Is it now a hardware/BIOS problem now?
Last edited by Knight; 08-20-2007 at 12:26 AM.
░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ Intel i7 3770k
░░░░░░▄▄▄▄▀▀▀▀▀▀▀▀▄▄▄▄▄▄░░░░░░░░░ ASUS GTX680
░░░░░░█░░░░▒▒▒▒▒▒▒▒▒▒▒▒░░▀▀▄░░░░░ ASUS Maximun V Gene
░░░░░█░░░▒▒▒▒▒▒░░░░░░░░▒▒▒░░█░░░░ Mushkin 8GB Blackline
░░░░█░░░░░░▄██▀▄▄░░░░░▄▄▄░░░█░░░░ Crucial M4 256GB
░░░▀▒▄▄▄▒░█▀▀▀▀▄▄█░░░██▄▄█░░░█░░░ Hitachi Deskstar 2TB x2
░░█▒█▒▄░▀▄▄▄▀░░░░░░░░█░░░▒▒▒▒▒█░░ FSP 750W Gold
░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ Fractal Arc Mini
[QUOTE=Knight;2380960]Well I get this. I loaded the driver with F6 and I hit 'S' to pick the right one. No luck.
You need to use the Abit cd to create a floppy with raid drivers. Its all in the manual.
Updated to the latest version of HD Tach and HD Tune
RIG 1: Asus Rampage Extreme X48
RIG 2: Foxconn BloodRage X58
E8600 Q820A349 @ 4.75Ghz: http://valid.canardpc.com/show_oc.php?id=596270
Originally Posted by JPxM0Dz
Updated to the latest version of HD Tach and HD Tune
you raptor guys live in a different zone than us working class puter guys!
BIOSTAR TPOWER I45 UNOFFICIAL THREAD
BIOSTAR TPOWER BOLT MOD FOR HEATPIPE AND HEATSINK
BIOSTAR TPOWER I45 BIOS FLASHING PROCEDURE
ABIT IP35 PRO HEATPIPE MOD
ABIT IP35 PRO BIOS FLASHING PROCEDURE
IP35 Pro: 9650@4000Mhz, par overclocker; Freezone Elite; 4Gb GSkill DDR-800@DDR-1068 (2 x 2gb); XFX 8800 GTS; Areca 8X PCIe in Raid 0 working at 4x speed; 4-250 Gb (single platter) 7200.10 drives; Giga 3DAurora case with side window.
hey for the vmod, i saw some post. i know it was mentioned before in the mess of pages. but what type of resistor do i need? 650kohm?
what type of solder did you guys use?
Last edited by strange|ife; 08-20-2007 at 05:15 PM.
~
I hope you have really steady hands, have you seen the size of those resistors?
I just started with the board tonight, straight in at 3.6GHz 450x8. The droop is quite bad,
1.53v bios
Idle
1.46-1.49 uguru
1.50 actual
Load.
1.42-1.46 uguru
1.455 actual
And the vcore is solid as a rock, third digit flickers only 0.004/5. The droop doesn't seem to effect the stability. Just took this chip from an Asus Blitz and Formula (both faulty), they needed 1.49v and 1.47v to get 8hrs prime. Early days yet but this board looks like 1.45v will be enough.
Last edited by fornowagain; 08-20-2007 at 06:29 PM.
1k-Ohm variable potentiometer.Radio shack has them and the solder.
Last edited by Forsaken1; 08-20-2007 at 06:22 PM.
Posting Permissions
Reply With Quote
Bookmarks