**Official ABIT IP-35 Pro Review/Overclock/Guide Thread**

[Master of None]

I have an LG SATA DVD/CD drive. Would that mean that it is on the Intel because it is a SATA drive? (How do I determine what controller it is on) The raid is on the Intel controller for sure.

The hard drives don't show up now. It shows 1-4 sata ports show empty in the BIOS. (I think that is what you mean)

Then it is on the Intel Controller. Scroll down the First Boot Device list and see if your LG SATA DVD/CD drive is down towards the bottom.

[Knight]

Then it is on the Intel Controller. Scroll down the First Boot Device list and see if your LG SATA DVD/CD drive is down towards the bottom.

Yeah it is!

OMG it was not there like yesterday...

I placed it before the hard drive, so not it boots from the DVD.

Thanks,

Lets see if Vista plays nice with the raid drivers.

[tomati]

Hi,

I have tested my mosfet rad with a B3 Q6600

3200 mhz with 1,48v in bios give 1.42v at idle and 1.37v in charge ( full load , occt 30 minute) need the vdroop mod.

the Q6600 hit 81°c and stablised ~75°c when the mosfet hit 81°c too for ~78°c stabilised.

I don't realy know if it's a good result but I found it a little bit hot , I will try again when I will received my Q6600 G0.