Intel Core 2 Duo E2140/E2160 Overclocking Results

[Prodigys]

Any tips how to get over the wall? ll be happy 4 any advice.. i end up at 410.. ve got a 8cm fan over the NB

priming my 2160, air cooling

You can rise the FSB + SB voltage and try again.

Very nice chip btw, i need 1.46VCore on 3.4Ghz .


So hopefully the wall goes away with some tweaking and you can get maybe 4Ghz .



BTW, Coretemp 0.94 and Speedfan give you the TCAse temp, you need the CORE temps, and those will be +15°c of the temps what you see there !
So remind it , else you gonna bow up your chip !

[$0m#0n#]

You can rise the FSB + SB voltage and try again.

Very nice chip btw, i need 1.46VCore on 3.4Ghz .


So hopefully the wall goes away with some tweaking and you can get maybe 4Ghz .



BTW, Coretemp 0.94 and Speedfan give you the TCAse temp, you need the CORE temps, and those will be +15°c of the temps what you see there !
So remind it , else you gonna bow up your chip !

u know with box temp were like 34 idle and 66C load.. in coretemp 0.94.. my ambient is like 20C.. with the thermalright ultra 120 i ve got 21 idle (i 'd say it right as i ve got a 12cm 2000rpm fan) and i ve got no case.. so the mobo is on the table.. and there is nothing like (its "hot" in case so u cant have 21 idle)..

so i ***** dont know what to trust

[Prodigys]

u know with box temp were like 34 idle and 66C load.. in coretemp 0.94.. my ambient is like 20C.. with the thermalright ultra 120 i ve got 21 idle (i 'd say it right as i ve got a 12cm 2000rpm fan) and i ve got no case.. so the mobo is on the table.. and there is nothing like (its "hot" in case so u cant have 21 idle)..

so i ***** dont know what to trust

The only program that is right is CoreTemp 0.95.
Maybe also TAT, BUT, that is a program that was originally created by Intel for mobile cpu's, so with that you also can get e wrong indication .


EDIT:

you need to change your ava