Post your X2 revision F3 OC and stepping

[LIKMARK]

Hi guys, I own a Amd 6000 X2 myself... currently got 13x250 @ stock volts

Ive got FSB on my Asus M2N32-SLi-DLX set 5x250 giving 1250... is this too high? it seems to cope fine... havnet upped any volts on mobo though or should i?

Also one other thing i hear that Amd 6000 currently 125W will be made in a 89W variety soon... will we see even more overclocking?


any help much appritiated

What's your stepping?

As is said earlier here, if your ht link runs fine at 1250, then you leave it at that.

We're hoping the 89W version will clock even higher because of lower temps, anyone getting one of them (or the X2 6400+ Black Box) can feel free to post results and steppings in this thread.

The list is updated

[Lightman]

AMD Athlon64 x2 3800+ Windsor 65w
CCB8F 0715RPMW

Bios Boot at 3.4Ghz
Max Stable SuperPi 1M at 3.45Ghz
Max Screen at 3.5Ghz
Vcore 1.65v
Air Cooling By Scythe Ninja DIY Socket AM2

http://valid.x86-secret.com/show_oc.php?id=229351

What I can say??

etc....

Superb chip you have there! Want to swap?

[Psycho_eddie]

What's your stepping?

As is said earlier here, if your ht link runs fine at 1250, then you leave it at that.

The list is updated

Just had to dismantle rig as im getting a new graphics card, found out:

CPU: CCB8F 0717VPMW

been running 13x250 for last few weeks on stock volts... chose this setting so can run my OCZ SLI pc8500 ram @ 1000MHZ.. but in playing around last month i ive been over 3600mhz playing around with fsb vs multi going over 400fsb. Once ive resetup, ill have to play around again as ill be having better cooling power etc, one thing as i run raid its more tempermental with ocing.. had to reinstall windows last time but with vista should be able to repair as vista acutally can see raid setups.

Has any1 anywhere got close to 4000mhz with an am2 cpu yet? Only if i had phase change

[OpTiX]

anyone else have this stepping CCB8F 0721TPMW i will post a screenie of what im currently running at in a few moments.

[mAJORD]

6400+ In the house!

Will post results tonight.. so far it's not bad.

brief results from quick play.

VID=1.40


1.25v undervolt @ stock

3.3 @ 1.37 (slight undervolt) is a bit disapointing so far, allthough this is with the stock 6000+ cooler, and temps are baad.

tonight will be real play time.

[OpTiX]

ok so here it goes x2 6000+ stepping CCB8F 0721TPMW, im not done with it yet where is what i got it at so far cooling is a scythe Infinity and a 70cfm fan:

[TiTON]

6400+ In the house!

Will post results tonight.. so far it's not bad.

brief results from quick play.

VID=1.40


1.25v undervolt @ stock

3.3 @ 1.37 (slight undervolt) is a bit disapointing so far, allthough this is with the stock 6000+ cooler, and temps are baad.

tonight will be real play time.

Wow.. very nice.. is the 6400+ out in the market already? Or is this an early sample.

Can't wait to see what you got.. please give use the full specs of your system.

SAD

[biohead]

6400+ In the house!

stepping?

[LIKMARK]

6400+ In the house!

Will post results tonight.. so far it's not bad.

brief results from quick play.

VID=1.40


1.25v undervolt @ stock

3.3 @ 1.37 (slight undervolt) is a bit disapointing so far, allthough this is with the stock 6000+ cooler, and temps are baad.

tonight will be real play time.

Bring on the results mAJORD!! and som pics!!

How dit you get by it?

[mAJORD]

All I can remember is it's a CBB8F 0722

I'm at work atm :P

A local retailer got some in on wednesday so I couldn't help myself :/

Have an E6750 here aswell to compare stock performance, though we allready have 1 source of results there.

One other thing. No unlocked multi!

[biohead]

One other thing. No unlocked multi!

What, 16x isn't enough? Bastard

[mAJORD]

Haha, well the promotional doco mentions unlocked multi's so I question why they bothered if it's not upwards unlocked. (could be jsut the bios not recognizing it I don't know at this stage)

Annyway not to worry for the moment :p





Just some quick runs, no proper stablilty test lengths here but I want to go to bed Starting to get hot again over here.. 25c ambient's, goodbye to long chilly nights for OCing for the year I guess

Max Orthos on the stock 6000+ Cooler (not included) LOL @ temps Didn't want to push any higher than this. Not actually sure how accurate those temps are, then again it was a pretty ty mount.




Max Orthos on Water (Swiftech block, diy rad). pumped the Vcore up to 1.5/1.49 load.



And a quick 1M pi run @ 3.6 . Still using my ram @ 375 5-5-5-18 as my Crucial STILL hasn't turned up yet, so pissed off. Point being though it needs more juice to head over 3.6 @ these temps.




So it seems pretty inline with other Good F3's. I'll crack out the peltier next. Time to go for the 4gig club It seems these things Love good temps. Just moving from the stock cooler that max of 3.3 @ stock - 70C load, went straight to 3.43@ stock - 50C load.

[pslee]

Haha, well the promotional doco mentions unlocked multi's so I question why they bothered if it's not upwards unlocked. (could be jsut the bios not recognizing it I don't know at this stage)

Annyway not to worry for the moment :p





Just some quick runs, no proper stablilty test lengths here but I want to go to bed Starting to get hot again over here.. 25c ambient's, goodbye to long chilly nights for OCing for the year I guess

Max Orthos on the stock 6000+ Cooler (not included) LOL @ temps Didn't want to push any higher than this. Not actually sure how accurate those temps are, then again it was a pretty ty mount.




Max Orthos on Water (Swiftech block, diy rad). pumped the Vcore up to 1.5/1.49 load.



And a quick 1M pi run @ 3.6 . Still using my ram @ 375 5-5-5-18 as my Crucial STILL hasn't turned up yet, so pissed off. Point being though it needs more juice to head over 3.6 @ these temps.




So it seems pretty inline with other Good F3's. I'll crack out the peltier next. Time to go for the 4gig club It seems these things Love good temps. Just moving from the stock cooler that max of 3.3 @ stock - 70C load, went straight to 3.43@ stock - 50C load.

wow. it is my first time seeing a 6400+. Amazing how it overclocks so well. I guess that is same for all b8s. But I am not very impressed with the orthos timing. I could pull off under 25 second with 14X mutli.

[msimax]

before you go sub zero do some water test

btw

[tictac]

do cinebench version 10 test...
get it here:
http://www.guru3d.com/newsitem.php?id=5754

[Psycho_eddie]

Looks good, im waiting for the 6000 89W edition to come out... then we can get some serious ocing!!

[pslee]

Looks good, im waiting for the 6000 89W edition to come out... then we can get some serious ocing!!

wow. I love your rig and monitor.

[mAJORD]

TicTac:

32bit: 3.56Ghz


Had a play with the peltier.. it's good quite controllable temps down to about 0c.

I'm going to attempt to go below 0 tommorow with LESS voltage than here.. as in line with what Flytek found, 1.6v + has little to no effect, lower temps would be better.

So This was captured @ 5-6c Idle. Not stable. (Can't be used under load anyway, pelt not powerfull enough) But alas it's my first 4gig Validaiton on AMD so.. yeah happy times



http://valid.x86-secret.com/show_oc.php?id=231099

[Serj_Over]

mAJORD 4 Gigs!! That is sick!!
What was the voltage in bios?

for mine X2 5600+ 3548 MHz on 1.55 vcore is max for benches
http://valid.x86-secret.com/show_oc.php?id=226801

[Psycho_eddie]

I like!, well done reaching 4000MHZ... looks like Amd still have some give left in it!

Amd 6000 125W RR £100, and Amd 6400 rrp??

Really annoying with my rig awaiting the new Graphics card, cant do ny overclocking

Whats would you say the 24/7 speed of this chip is?

[pslee]

when are those 6400+ reaching US?

[mAJORD]

coldbug is @ about -4 at the 250HTT mark.. grr

[LIKMARK]

Congrats mAJORD! Not many who has reached the 4GHz mark!! Awsome!


go for the WR next!

BTW: Post your results in the Xtreme OC part of the forum. Need some AMD results there to kill the Intel dominance
Just make them get used to it as it will happen anyways when the Phenom comes to town

[Lightman]

Congrats mAJORD

Both brilliant job on finding X2 6400+ that early in retail and bringing us another 4GHz 90nm X2!! Masterpiece

[m411b]

I made a boo boo in my stepping! I just tore down my rig to clean and looked at the stepping.
CCBVF 0704TPMW is the right stepping..

BTW, thats good stuff mAJORD!