ASUS P5K Deluxe - Intel P35 Bearlake + E6600 B1 / Q6600 B3

[timber715]

does anyone have a temperature difference between cores (Q6600)?
i'm getting 4 to 7C diff. from cores 0&1 against 2&3 cores.
core0-29
core1-28
core2-23
core3-24

are these normal? i'm reading them from speedfan 4.32
thanks for any reply

[rbsmontemor]

does anyone have a temperature difference between cores (Q6600)?
i'm getting 4 to 7C diff. from cores 0&1 against 2&3 cores.
core0-29
core1-28
core2-23
core3-24

are these normal? i'm reading them from speedfan 4.32
thanks for any reply

Same here

[chessman]

does anyone have a temperature difference between cores (Q6600)?
i'm getting 4 to 7C diff. from cores 0&1 against 2&3 cores.
core0-29
core1-28
core2-23
core3-24

are these normal? i'm reading them from speedfan 4.32
thanks for any reply

Also here !

[synergy]

Same here. Though I KNOW my TRU120X is loose,
so I'm sure my temperatures could be better.
Right now :
Idle @ 1.06V / 1.60 GHz:
Core 0 34
Core 1 34
Core 2 28
Core 3 32

And the ~ 7C to ~ 8C difference maintains even
at higher loads and frequencies.

Oddly there's usually a several (4-5) degree temperature difference even between Core2 and Core 3 which
should be on the same die. I wonder if my heat sink
grease isn't spread well over that die or what.

does anyone have a temperature difference between cores (Q6600)?
i'm getting 4 to 7C diff. from cores 0&1 against 2&3 cores.
core0-29
core1-28
core2-23
core3-24

are these normal? i'm reading them from speedfan 4.32
thanks for any reply

[`danny]

Same here. Though I KNOW my TRU120X is loose,
so I'm sure my temperatures could be better.
Right now :
Idle @ 1.06V / 1.60 GHz:
Core 0 34
Core 1 34
Core 2 28
Core 3 32

And the ~ 7C to ~ 8C difference maintains even
at higher loads and frequencies.

Oddly there's usually a several (4-5) degree temperature difference even between Core2 and Core 3 which
should be on the same die. I wonder if my heat sink
grease isn't spread well over that die or what.

I know I don't have a Quad core like you but my E6420 has core 0 run @ 28C & Core 1 runs at 32C idle. I wouldn't worry too much about it