simri it sounds like you have managed to corrupt your bios chip. Call Asus and ask for the bios department and they will send you a new one 502-995-0883.
With this board there is no need to pull the jumper!!! if you OC to far and it won't move just hold down the power on switch til it goes off, when things stop spinning hit it again . you will get an over clock error and it will tell you to hit F1 to boot .This will take you back to the bios to try again. Again there is no need to pull the JUMPER. In the future make sure of what you are removing before you remove it! I have built 13 systems on these boards they have all been perfect!!!
Don't try to tell me I just happen to get 13 great boards and 13 great cpus and hell even 13 sets of great memory. It isn't luck. Too many of you overthink this. It is not rocket science. (which is not really hard either)
Too many of you know too little and should just leave the damn side covers alone. If there were a shred of decency in this world this miserable thread would be deleted. People don't search it, they just want to re-ask the same ?'s for god knows how many times. very few really want to research and understand anything most just want some killer OC and they want it now!!! I have been running these boards for over a year now. Starting back
with a Presler 950es which was great cuz it would just kick the hell out of an FX-60 so it made my day. Then I moved to the e6400, again it was just unreal fast but, this board works best with the 6600 and higher due to the need for higher multipliers to work with. These boards have been great to me.

WZ