MMM
Page 18 of 31 FirstFirst ... 81516171819202128 ... LastLast
Results 426 to 450 of 753

Thread: Post your recent Q6600 purchases here (The Lookout for g0)

  1. #426
    Xtreme Enthusiast
    Join Date
    May 2007
    Posts
    983
    To RMA a perfectly good CPU is dishonest if you have already opened and used it. If it didn't overclock like you wanted to that's not intel's problem and not the vendors problem. This kind of thing just raises the price of CPU's for the rest of us. I RMA'd a CPU before because i checked results others were getting by the batch code. So... unopened i RMA'd the processor. Now the vendor can still sell it at full price as it's been unopened. Just my two cents on that type of practice. That's assuming you are running at stock volts. Now overvolting the chip and overclocking and THEN returning it is just downright criminal.

    On another note i REALLY wish i had paid for faster shipping for my 'G0' from tankguys. Fedex has scheduled delivery for 8/14 . Bummer.
    i5 2500K @ 4.7ghz 1.32v(+.010 offset LLC set to 4) / ASRock P67 Extreme4 (B3) / 2x4gb Samsung Green MV-3V4G3D @ 1866mhz 1.35v / AMD HD 6850 1gb /2x150gb Velociraptor Raid 0 + 500gb WD Green / Corsair TX 750watt V2

  2. #427
    Xtreme Guru
    Join Date
    Dec 2003
    Location
    Vancouver, Canada
    Posts
    3,858
    I got my G0 from NCIX today. Everything else that was left at the location I was at (Richmond) was B3. Beware!

    O/C results later.
    i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
    Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60
    Quote Originally Posted by CompGeek
    The US is the only country that doesn't use [nuclear weapons] to terrorize other countries. The US is based on Christian values, unlike any other country in the world. Granted we are straying from our Christian heritage, but we still have a freedom aimed diplomatic stance.

  3. #428
    Xtreme Member
    Join Date
    Jun 2006
    Posts
    137
    Quote Originally Posted by GripS View Post
    To RMA a perfectly good CPU is dishonest if you have already opened and used it. If it didn't overclock like you wanted to that's not intel's problem and not the vendors problem. This kind of thing just raises the price of CPU's for the rest of us. I RMA'd a CPU before because i checked results others were getting by the batch code. So... unopened i RMA'd the processor. Now the vendor can still sell it at full price as it's been unopened. Just my two cents on that type of practice. That's assuming you are running at stock volts. Now overvolting the chip and overclocking and THEN returning it is just downright criminal.

    On another note i REALLY wish i had paid for faster shipping for my 'G0' from tankguys. Fedex has scheduled delivery for 8/14 . Bummer.
    Yeah, this is why if express shipping is only a few bucks more, I would go for it. What's a few bucks for getting your CPU in 1-3 days, right?
    Processor: Intel Core 2 Quad Q6600 G0 2.4@3.33 Ghz (1.28 vcore under load) with Arctic Cooling Freezer 7 Pro
    Videocard: BFG GTX 260 w/ Dell SP2309W
    Mainboard: Asus P5Q-E Pro w/ Antec TruePower 2.0 550 SLI-Ready in Antec 900
    Memory: 4GB @ DDR2-740.
    Speakers/Sound card: Logitech Z-2300 w/ Creative Labs X-Fi Xtreme Music
    Harddrives: RAID0 with 2 x 500GB Seagate Barracudas SATAII

  4. #429
    Xtreme Addict
    Join Date
    Apr 2005
    Posts
    2,208
    Quote Originally Posted by GripS View Post
    To RMA a perfectly good CPU is dishonest if you have already opened and used it. If it didn't overclock like you wanted to that's not intel's problem and not the vendors problem. This kind of thing just raises the price of CPU's for the rest of us. I RMA'd a CPU before because i checked results others were getting by the batch code. So... unopened i RMA'd the processor. Now the vendor can still sell it at full price as it's been unopened. Just my two cents on that type of practice. That's assuming you are running at stock volts. Now overvolting the chip and overclocking and THEN returning it is just downright criminal.

    . Bummer.
    I do not see anything wrong with it if:

    The seller offers returns with a restocking charge, like Newegg. If it is defective at Newegg, you cannot get a refund. If you look at the open-box items at Newegg you will see they do not discount them much.

    The thing I do not like is guys tearing up hardware oc'ing and then RMA'ing it as defective.

    Where have you seen the open-box hardware that goes so cheap?

    Newegg:
    An RMA refund is a request for a refund of the purchase price (view warranty information). If the product you wish to return is defective, you may only request an RMA repair.
    * All RMA refunds are subject to a 15% restocking fee.

  5. #430
    I am Xtreme
    Join Date
    Nov 2002
    Location
    South FL, USA
    Posts
    4,892
    Quote Originally Posted by GripS View Post
    To RMA a perfectly good CPU is dishonest if you have already opened and used it. If it didn't overclock like you wanted to that's not intel's problem and not the vendors problem. This kind of thing just raises the price of CPU's for the rest of us. I RMA'd a CPU before because i checked results others were getting by the batch code. So... unopened i RMA'd the processor. Now the vendor can still sell it at full price as it's been unopened. Just my two cents on that type of practice. That's assuming you are running at stock volts. Now overvolting the chip and overclocking and THEN returning it is just downright criminal.

    On another note i REALLY wish i had paid for faster shipping for my 'G0' from tankguys. Fedex has scheduled delivery for 8/14 . Bummer.

    you need to stop pre-judging others for a simple statement like he RMA'd a cpu with no restocking fee...ALL of us here understand that an open CPU box is accepted back as a return but you are subjected to a restocking fee....when you return without a restocking fee, it generally has to be a dead cpu or the cpu box has not been opened.
    Last edited by Ace-a-Rue; 08-09-2007 at 05:58 PM.
    BIOSTAR TPOWER I45 UNOFFICIAL THREAD

    BIOSTAR TPOWER BOLT MOD FOR HEATPIPE AND HEATSINK

    BIOSTAR TPOWER I45 BIOS FLASHING PROCEDURE

    ABIT IP35 PRO HEATPIPE MOD

    ABIT IP35 PRO BIOS FLASHING PROCEDURE

    IP35 Pro: 9650@4000Mhz, par overclocker; Freezone Elite; 4Gb GSkill DDR-800@DDR-1068 (2 x 2gb); XFX 8800 GTS; Areca 8X PCIe in Raid 0 working at 4x speed; 4-250 Gb (single platter) 7200.10 drives; Giga 3DAurora case with side window.

  6. #431
    Xtreme Cruncher
    Join Date
    Apr 2005
    Posts
    320
    got my g0 from clubit today, its a l723a841. I've been running it on my DS3 and it's not doing well at all. Sure I will have better results with my premium that comes tomorrow :/

  7. #432
    Registered User
    Join Date
    Dec 2005
    Posts
    39
    got a GO Quad 6600 from Clubit yesterday L723A841. Will be mating this with a P5k premium soon.
    Have another GO coming from Tankguys soon also
    Last edited by fsh42na; 08-09-2007 at 06:45 PM. Reason: more comments

  8. #433
    Banned
    Join Date
    Aug 2007
    Posts
    6
    Lolers at all the quad core fanboys lately! you guys are going to be sorry when you didnt wait for the real quad core in just a few months that is going to trash the current one! LOL!

  9. #434
    Banned
    Join Date
    Jun 2006
    Location
    Durham, NC
    Posts
    2,877
    Quote Originally Posted by lolers View Post
    Lolers at all the quad core fanboys lately! you guys are going to be sorry when you didnt wait for the real quad core in just a few months that is going to trash the current one! LOL!
    Stop trolling, plz. I see the lollercaust somehow missed you.

  10. #435
    Xtreme Guru
    Join Date
    Dec 2003
    Location
    Vancouver, Canada
    Posts
    3,858
    Ok, I think the default mounting on the Ultra-120 ET is too soft. Check out this discrepancy.

    Is it normal to have a difference of 8 degrees between Core0+1 and Core2+3?
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	diff_on_side.GIF 
Views:	684 
Size:	13.7 KB 
ID:	62730  
    i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
    Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60
    Quote Originally Posted by CompGeek
    The US is the only country that doesn't use [nuclear weapons] to terrorize other countries. The US is based on Christian values, unlike any other country in the world. Granted we are straying from our Christian heritage, but we still have a freedom aimed diplomatic stance.

  11. #436
    I am Xtreme
    Join Date
    Nov 2002
    Location
    South FL, USA
    Posts
    4,892
    i think you are in the wrong area for that post...why don't you post that over in Air Cooling section...a good topic to talk about over THERE.
    BIOSTAR TPOWER I45 UNOFFICIAL THREAD

    BIOSTAR TPOWER BOLT MOD FOR HEATPIPE AND HEATSINK

    BIOSTAR TPOWER I45 BIOS FLASHING PROCEDURE

    ABIT IP35 PRO HEATPIPE MOD

    ABIT IP35 PRO BIOS FLASHING PROCEDURE

    IP35 Pro: 9650@4000Mhz, par overclocker; Freezone Elite; 4Gb GSkill DDR-800@DDR-1068 (2 x 2gb); XFX 8800 GTS; Areca 8X PCIe in Raid 0 working at 4x speed; 4-250 Gb (single platter) 7200.10 drives; Giga 3DAurora case with side window.

  12. #437
    Registered User
    Join Date
    Aug 2007
    Posts
    12
    Quote Originally Posted by Ace-a-Rue View Post
    ....when you return without a restocking fee, it generally has to be a dead cpu or the cpu box has not been opened.
    zipzoomfly refused to take mine back without a restocking fee and it is unopened. They knew it was unopened because I called about canceling/RMA before the cpu had been delivered. I was rather courteous and even offered to pay a reduced restock fee, but no... They are very inflexible in my experience.

    I would certainly expect a restocking fee if it were opened because they would have to sell it open box.

  13. #438
    Banned
    Join Date
    Aug 2007
    Posts
    6
    Quote Originally Posted by Ace-a-Rue View Post
    i think you are in the wrong area for that post...why don't you post that over in Air Cooling section...a good topic to talk about over THERE.
    Water or air the same applies. Clock for clock the 45nms will spank it.

  14. #439
    Banned
    Join Date
    Jun 2006
    Location
    Durham, NC
    Posts
    2,877
    BTW, my Q6600 G0 shipped from ClubIT today via FedEx.

    Wish me luck.

  15. #440
    Xtreme Addict
    Join Date
    Apr 2005
    Posts
    2,208
    Quote Originally Posted by IvanAndreevich View Post
    Ok, I think the default mounting on the Ultra-120 ET is too soft. Check out this discrepancy.

    Is it normal to have a difference of 8 degrees between Core0+1 and Core2+3?
    Don't see much of you anymore.

  16. #441
    Registered User
    Join Date
    Aug 2007
    Posts
    12
    Quote Originally Posted by GripS View Post
    Not so sure getting a B3 is necessarily a bad thing. People here in the forum are getting 3.6ghz out of em. Of course it's still the luck of the draw. But just because you got a B3 does not mean it's gonna be a crapper.
    Good point. The top performing B3 quads had no q6700 bin to fall into so the B3 q6600s had some robust chips. On the other hand there is the possibility that a healthy portion of B3s are the weak performers that just made the cut.

    Interestingly, the presence of the new Q6700 might actually guarantee, via the binning process, that the G0 Q6600s will not include the true top performing quads, which will end up in the Q6700 bin. Of course the q6700s are probably a much much smaller portion of the market that it hardly keeps the q6600 G0 bin down... That is probably just a steaming pile of BS to rationalize contentment with a B3, but it sounds nice to me.

    Ha ha ha, who am I kidding, I'm was never planning on pushing 3.0GHz in the first place! I'd probably not know the difference between the two chips had I not heard about the new stepping and subsequently obsessed over getting one. Sheesh.

  17. #442
    I am Xtreme
    Join Date
    Nov 2002
    Location
    South FL, USA
    Posts
    4,892
    Quote Originally Posted by IvanAndreevich View Post
    Ok, I think the default mounting on the Ultra-120 ET is too soft. Check out this discrepancy.

    Is it normal to have a difference of 8 degrees between Core0+1 and Core2+3?
    Quote Originally Posted by Ace-a-Rue View Post
    i think you are in the wrong area for that post...why don't you post that over in Air Cooling section...a good topic to talk about over THERE.
    Quote Originally Posted by lolers View Post
    Water or air the same applies. Clock for clock the 45nms will spank it.
    my quote was talking about the quote above mine...
    Last edited by Ace-a-Rue; 08-09-2007 at 08:05 PM.
    BIOSTAR TPOWER I45 UNOFFICIAL THREAD

    BIOSTAR TPOWER BOLT MOD FOR HEATPIPE AND HEATSINK

    BIOSTAR TPOWER I45 BIOS FLASHING PROCEDURE

    ABIT IP35 PRO HEATPIPE MOD

    ABIT IP35 PRO BIOS FLASHING PROCEDURE

    IP35 Pro: 9650@4000Mhz, par overclocker; Freezone Elite; 4Gb GSkill DDR-800@DDR-1068 (2 x 2gb); XFX 8800 GTS; Areca 8X PCIe in Raid 0 working at 4x speed; 4-250 Gb (single platter) 7200.10 drives; Giga 3DAurora case with side window.

  18. #443
    Xtreme Cruncher
    Join Date
    Oct 2006
    Location
    Boston, Massachusetts
    Posts
    2,224
    Quote Originally Posted by lolers View Post
    Water or air the same applies. Clock for clock the 45nms will spank it.
    And lolers, you have the money to buy a 45nm when it drops? If not gtfo and stop trolling. 6 posts and all of them are smack talk, and you have yet to have anything constructive or have any listing or pics of your rig and what your running with to talk everyone elses purchases down.

  19. #444
    Xtreme Member
    Join Date
    Jul 2007
    Posts
    317
    loler, i really dont buy anybodys crap about real quad core or fake quad core, have seen the damn preformance difference between dual core and quad in multi threaded applications, u bet it is twice as fast a dual core clocked at the same speed, so to me it sounds like quad core is a quad core as long as it has four cores, whether it be real or fake, everyone here is reporting their purchase and some are showing their results,

    and yes i have ordered my G0 quad from clubit which will be here next week, and i am happy i did, and when 45nm comes around i will upgrade cuz thats just me, my cpu is always up to date.

    and the only major difference with the 45nm is going to be more cache and sse4 support, thats about it, let people be happy with their purchase because its their money.

    and yea i always thought it was stupid to buy the xtreme chips and i also thought people were stupid who bought them but only until i had the extra cash to buy one, i realized if u got the cash ur purchase is never stupid, hey one of my xtreme chips made me happy.
    Last edited by NKD; 08-09-2007 at 08:27 PM.
    Q9450(VID 1.2375) 3.9GHX 488*8 1.32V LOADED
    Asus P5Q-E
    CRUCIAL BALLISTIX 3GB RUNNING@980MHZ 5-5-5-12
    RADEON HD 4870
    OCZ VENDETTA 2
    WINDOWS VISTA 32BIT
    average room temp 72-76c

  20. #445
    Xtreme Enthusiast
    Join Date
    May 2007
    Posts
    983
    Quote Originally Posted by dogsx2 View Post
    I do not see anything wrong with it if:

    The seller offers returns with a restocking charge, like Newegg. If it is defective at Newegg, you cannot get a refund. If you look at the open-box items at Newegg you will see they do not discount them much.

    The thing I do not like is guys tearing up hardware oc'ing and then RMA'ing it as defective.

    Where have you seen the open-box hardware that goes so cheap?
    It's the latter that i am talking about and you know it! What forum are we in? Are we to believe someone RMA's a processor because they just 'didn't like it'? It was overclocked. Didn't overclock high enough(after putting ample voltage through it) and then returned. Nuff said.
    i5 2500K @ 4.7ghz 1.32v(+.010 offset LLC set to 4) / ASRock P67 Extreme4 (B3) / 2x4gb Samsung Green MV-3V4G3D @ 1866mhz 1.35v / AMD HD 6850 1gb /2x150gb Velociraptor Raid 0 + 500gb WD Green / Corsair TX 750watt V2

  21. #446
    Xtreme Member
    Join Date
    May 2005
    Posts
    111
    Just so you know its sitting there in the unopened retail box, I wouldnt RMA something I opened that worked perfectly fine.

  22. #447
    Xtreme Member
    Join Date
    Jul 2007
    Posts
    317
    well honestly i wouldnt rma something open boxed either, but if i really had to rma it i would let the company know, i ordered a processor once from mwave.com and i got the b3 stepping quad core and i really wanted to return it because it was a b3 and i told the guy straight up that i just wanted to return it because its not a g0 stepping, and u know what he was cool, and said u do a lot of business with us and i respect the fact tha u told me that its fine and he will take it back, he told me that he doesnt like the fact people telling them its defective, if u do a lot of business with one company they would take anything back to keep u as a customer, i believe u just have to tell them the truth, i have ordered plenty from mwave.com, and they have always respected my business, and i have never lied to them about a product being defective, if i am not satisfied they will take it back.

    VAdept i believe that he was just referring to any person who just wants to return it just because it didnt overclock well or they would tell them its defective to just return it. i am sure it wasnt directly pointed at u.

    as i said, if i dont like something i will tell them straight up, or if i got a b3 instead of a g0 i would tell them, and actually the customer service guy called me to keep me as their customer and said he would approve the rma just because i do a lot of business with them and he would like to keep me as their customer. i actually thought they wouldnt take it back but u know what they have won my business, yes i might not get a g0 stepping from them, but i always purchase most of my stuff from them, and thier prices are actually better than newegg.com in most cases. they have a really nice warehouse in california. i used to be a newegg customer and i still am, but the fact i can just drive 20mins and pick up my order from mwave.com is very convinient. they have a great customer service, if u do lots of business the are second to none in customer service.
    Q9450(VID 1.2375) 3.9GHX 488*8 1.32V LOADED
    Asus P5Q-E
    CRUCIAL BALLISTIX 3GB RUNNING@980MHZ 5-5-5-12
    RADEON HD 4870
    OCZ VENDETTA 2
    WINDOWS VISTA 32BIT
    average room temp 72-76c

  23. #448
    Xtreme Enthusiast
    Join Date
    Mar 2005
    Location
    NYC (LAMF)
    Posts
    526
    any resullts from a clubit g0 yet? there are very few results posted from these q6600 g0's so far, from any source. when the c2d's dropped, there were results everywhere. there are some here and there, but not enough to get a clear idea if they are any better than the b3, or any idea of what the average oc is. they have been available for a couple weeks now. mine comes today. i will be definitely posting my results tonight after i get home.
    I7 920 @ 4400 TRUE......Q9550 @ 4000
    evga X58.....................DFI LP UT P45 T2R
    Patriot ddr3 1600..........Super Talent 4gb
    HD4890 CF...................9800GX2
    Zalman 1KW.................Corsair 750
    Lian LI V1000B Plus 2.....Lian LI A05b
    Boot Drives are 80gb Velociraptors
    all os vista64 ultimate

  24. #449
    I am Xtreme
    Join Date
    Nov 2002
    Location
    South FL, USA
    Posts
    4,892
    trust me..."G0" in the Q6600 flavor are overclocking very well...it would be a rare bird if it did not!
    BIOSTAR TPOWER I45 UNOFFICIAL THREAD

    BIOSTAR TPOWER BOLT MOD FOR HEATPIPE AND HEATSINK

    BIOSTAR TPOWER I45 BIOS FLASHING PROCEDURE

    ABIT IP35 PRO HEATPIPE MOD

    ABIT IP35 PRO BIOS FLASHING PROCEDURE

    IP35 Pro: 9650@4000Mhz, par overclocker; Freezone Elite; 4Gb GSkill DDR-800@DDR-1068 (2 x 2gb); XFX 8800 GTS; Areca 8X PCIe in Raid 0 working at 4x speed; 4-250 Gb (single platter) 7200.10 drives; Giga 3DAurora case with side window.

  25. #450
    Xtreme Enthusiast
    Join Date
    Mar 2005
    Location
    NYC (LAMF)
    Posts
    526
    Quote Originally Posted by Ace-a-Rue View Post
    trust me..."G0" in the Q6600 flavor are overclocking very well...it would be a rare bird if it did not!

    thanx, but "overclocking very well" wasnt exactly the data i was looking for. does anybody have anything a little more specific?
    I7 920 @ 4400 TRUE......Q9550 @ 4000
    evga X58.....................DFI LP UT P45 T2R
    Patriot ddr3 1600..........Super Talent 4gb
    HD4890 CF...................9800GX2
    Zalman 1KW.................Corsair 750
    Lian LI V1000B Plus 2.....Lian LI A05b
    Boot Drives are 80gb Velociraptors
    all os vista64 ultimate

Page 18 of 31 FirstFirst ... 81516171819202128 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •