Post your X2 revision F3 OC and stepping

[biohead]

Guys, do you think these new F3's 5600's can do 3.0GHZ on stock vcore. My current Dell E521 has a Brisbane 4400 that can do 2.7GHZ stable on stock vcore. I really want a 5600 due to the 1meg cache and the potential to have a 3GHZ chip in my cheap ass dell should give it a nice boost.

If you're lucky you'll get a CCB8F and it'll do beyond 3.0 GHz

[LIKMARK]

mine does 3300 with 1.52 too

Do you have your stepping?

Guys, do you think these new F3's 5600's can do 3.0GHZ on stock vcore. My current Dell E521 has a Brisbane 4400 that can do 2.7GHZ stable on stock vcore. I really want a 5600 due to the 1meg cache and the potential to have a 3GHZ chip in my cheap ass dell should give it a nice boost.

You have to be unlucky if you don't get a X2 5600+ up to 3000Mhz ++

[vengance_01]

Do you have your stepping?



You have to be unlucky if you don't get a X2 5600+ up to 3000Mhz ++

but on stock vcore?

[LIKMARK]

but on stock vcore?

Not sure there, but I think you can oc at least a bit on stock vcore

[ea6gka]

Do you have your stepping?

CCB6F 0713 TPMW

i am currently 24/7 rock stable at 3100 1.42V. 3200 needs 1.47-1.48 but i live in greece and summer temps are high so...

[pslee]

CCB6F 0713 TPMW

i am currently 24/7 rock stable at 3100 1.42V. 3200 needs 1.47-1.48 but i live in greece and summer temps are high so...

I could get mine over 3.300 ghz, but it is not stable (temperature issues) to run 3dmark06. I get blue screen of death in the second cpu test section. Otherwise it runs fine but I do care about my cpu's life expectancy. I run my cpu stock at 3 ghz but I oc whenever I do benchmarks.