Asus P5KC first look

[Jasy]

That's a good fsb
I just want to know the max you can get with the ddr2 and some superpi 1M/32M.
Comparing this board with the p5k wich one is the best?

edit: When you find all the vmod/reading points, post some images.
Thanks

[dinos22]

i have this board for testing along with corsair PC10000 DDR2 and Corsair 1600MHz CAS7 DDR3 sticks

i've had some quick tests with DDR3 and pushed it to ~850 but seems there is a frequency limit of some sort as it was around 2v with CAS7/8/9

will do a pencil mod as droop reported in CPUz is bad and my E6700 has trouble booting at 4GHz which it should not

will do some decent tests and post some results in a new thread to avoid clutter here

[Liquid3D]

Can't thank you enough for that update, you may hve just saved me many hours of headaches and the money which I don't have to spen on the board.

This is what DIY community should be all about. Of course I do hope your able to correct the problem.

[Liquid3D]

i have this board for testing along with corsair PC10000 DDR2 and Corsair 1600MHz CAS7 DDR3 sticks

i've had some quick tests with DDR3 and pushed it to ~850 but seems there is a frequency limit of some sort as it was around 2v with CAS7/8/9

will do a pencil mod as droop reported in CPUz is bad and my E6700 has trouble booting at 4GHz which it should not

will do some decent tests and post some results in a new thread to avoid clutter here

When you say 850 do you mean 1700MHz or literally 850MHz

[dinos22]

When you say 850 do you mean 1700MHz or literally 850MHz

i meant 850x2

[Liquid3D]

Would you choose any other DDR3 board if you could ?

[dinos22]

Would you choose any other DDR3 board if you could ?

definitely

have a look at my DDR3 corsair thread i did some testing

i don't know about u fellas but i took some photos of the phase coil that burnt my finger idling....sitting next to the 4-pin connector

i would definitely not buy this board unless i have a sample

and also my one droops bad >>>>>>>>> 1.36 in bios, 1.336 idle windows and under prime it keeps dropping to 1.31/1.29/1.27/1.26/1.25/1.24 i gave it a couple of strokes where pencil mod is supposed to be NOTHING

at first i thought it was my quad core in there so i replaced with dual core and still the same

have a look at the thread >>> http://www.xtremesystems.org/forums/...d.php?t=153958