Results 1 to 25 of 3883

Thread: *Official Retail G0 Q6600 Overclocking Thread*

Threaded View

  1. #10
    Xtreme Member
    Join Date
    Jan 2007
    Posts
    186
    i just installed a thermalright ultra 120 extreme with shin-etsu paste.

    my ninja was a POS compared to this cooler.

    my load temps with the ninja were hitting 69/71 @ 3.4ghz with the same volts as my loads now @ 3.42ghz being 10c less at 61/59. ambient temps have been more or less the same, high 70F in the room, and humid.

    i also idle 5 degrees lower.

    i benched this at 3.5 for 15 minutes which is nothing, and at 3.42 first for an hour - all stable of course - but i gotta goto bed its late eastern time and worky in the mornin.

    i expect to be stable close to 3.6 or higher but ill run this 24/7 at 3.42 (im no xtreme oc'er) since my idle is nice and 61 load is dandy with me since real world usage will never get there - and provide an updated OC after hours of prime stable on my high oc.

    with both coolers i ran an antec tri-cool on high with the rear exhaust on high (due to summer)

    in fall/winter i run the fans on medium or low.
    Last edited by idiotekniQues; 08-01-2007 at 09:30 PM.
    Signature removed due to failure to follow Policies & Guidelines.
    Please read them, located at the top of the forums.
    Unapproved/Unaffiliated link.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •