My New Toys AM2

[msimax]

doing some testing



also does any know to mod bios timmings not add them but change the default settings, because the problem im having is no clockgen program works yet for this board and when i try 300x10 with mem@800 div i get hanged boot.

now the problem is @ that speed the mem timings are way to tight for ddr 1200. mostly the mal and im guessing others too, what i need is a very loose memory timing bios that i can boot with then tighten up in windows with memset. ill be a guinea pig to try the bios.

also need to set drive strengths set to weak thank you

these are the only timings available

[msimax]

*UPDATE*
for those with a 4x4 mb theres a new way to overclock. if your like me and to go through the bios to test your cpu at different speeds today is a good day. i have stumbled on a way to overclock in windows by accident

1 set your max fsb in the bios ex. 330x7
2 boot up into windows
3 you should have ntune am2tools and systools installed. load all

ntune has a working clockgen for this mb but it cannot go higher than what you set in the bios.. so now where at 330x7 back down to about 250.

now with systools that alows you to change your multi to anything..so i change that to 10x now my system is running @2500mhz .. now back to ntune u then can clock up to the max fsb u set in the bios while running orthos to check for stability p.s. you can also use ntune and memtest to tweak your rams if your trying to break records






now you can upclock.. and the max fsb you can load up windows with is the max fsb you can play with, even if yours is 250-300 you have 5-25x multis at your disposal



now break some records

[xforce]

Nice work there MSIMAX. Keep it up
Based on your personal experience, which AM2 mobo do you recommend for serious oc ??

[msimax]

Nice work there MSIMAX. Keep it up
Based on your personal experience, which AM2 mobo do you recommend for serious oc ??

the dfi 590sli is a nice board once you work out the kinks
but what i want to try in the future is a crosshair with one of those 89w 6000+
should be beastly

also the infinity ultra m2 gets the job done for cheap

[Lightman]

Good work so far with this Quad setup, but we all are waiting for some results !

[msimax]

they have my next baby

http://enthusiast.hardocp.com/articl...50aHVzaWFzdA==

[msimax]

cinebench run

[Lightman]

I love this thread!!

msimax how much more you think can be squeezed from that QuadFX setup?
Is 20GB/s possible when new PSU will arrive?

Good work !

[msimax]

ran my new cooling and trying out winxp64,man i wish i had a new psu now i wonder how many are going to make the switch on the 10th

[msimax]

[msimax]