**Official ABIT IP-35 Pro Review/Overclock/Guide Thread**

[MikalCarbine]

are you saying 3.9Ghz is not stable for you at 1.55 Vcore?

my definition of stable is: "what ever you do with the puter and it does not randomly reboot, freeze, BSOD or programs close out on you."

that's my definiton of a 24/7 computer!

1.55v is stable at 3.9GHz for my cpu but I'm worried about volts. I'm thinking of lapping my CPU in hopes of better temps/slightly better clock. I might also do the vdroop mod and see if it helps with stability

here, again, are my voltage settings (bios set to 1.6325 for Vcore)...i should mention that my GTL is set to 69%.

I notice your CPU VTT is 1.3, did that help marginally in clocking?

Any ideas why I still can't post at 520mhz?

[Ace-a-Rue]

1.55v is stable at 3.9GHz for my cpu but I'm worried about volts. I'm thinking of lapping my CPU in hopes of better temps/slightly better clock. I might also do the vdroop mod and see if it helps with stability



I notice your CPU VTT is 1.3, did that help marginally in clocking?

Any ideas why I still can't post at 520mhz?

i won't be staying with this Q6600 for more than a year and a half...my wife will get it as a gift.

as far as volts go for the vcore, it is up to you to figure out how long you will have it in your puter case...intel warranties them for 3 years if it is a retail copy...whatever makes you comfortable.

i find that 1.31v set in the bios for CPU VTT is slightly better than say at 1.27v.

OH!...6 minutes running everest stability, in my book, is a good as running it 24/7

EDIT:..i can't beyond 505 FSB at 7X, not even 6X...so...feel lucky if you can post at 515