POST YOUR E6850 with OC PERFORMANCE

**dinos22** · 07-29-2007, 06:47 PM

Originally Posted by luihed

Got a L722A241... I did some spi but the times were so slow I didnt bother saving em, at 3600mhz it was 28sec slower than my E6600 in spi 32M... I just tested max suicide and max fsb then I packed it up, gonna return it tommorrow morning....

maybe the abit is making it run on 1333 strap man

try an asus motherboard

**SchnitzelDeluxe** · 07-29-2007, 07:32 PM

this here is not an 6850 its an 6600, sry, but thi ios the most impressive core2duo i have ever seen:

aircooled 68°C

**dinos22** · 07-29-2007, 07:45 PM

is that your CPU man

that's just absolutely amazing !!!

does it have high FSB as well??

**michaLcoughliN** · 07-30-2007, 07:51 AM

70c =/ eeep..

**overcrash86** · 07-30-2007, 07:51 AM

Originally Posted by luihed

Got a L722A241... I did some spi but the times were so slow I didnt bother saving em, at 3600mhz it was 28sec slower than my E6600 in spi 32M... I just tested max suicide and max fsb then I packed it up, gonna return it tommorrow morning....

http://ocidb.com/albums/userpics/10062/mini4500.jpg

http://ocidb.com/albums/userpics/10062/normal_550.png

what is the cooling for max screen ?

**lazy** · 07-30-2007, 08:59 AM

as someone else mentioned, it seems rather easy getting this cpu up to 4GHz and running pi, but there still hasnt been that many thats able to primie stable for serveral hours

**pvhk** · 07-30-2007, 09:04 AM

Gigabyte GA-G33M-DS2R in NSK3400 matx case, crucial ballistix 2x512, 7900GS xpertvision.
Bios F2 used
e6850@4ghz on air : thermalright ultra120
FSB@444, ratio 9x, vcore@1.56250v set in bios
occt version 1.1.0 passed

vdroop:

cores temperatures:

orthos 3h:

**michaLcoughliN** · 07-30-2007, 09:08 AM

3hrs isnt techincally "stable" IMO. 10hours ide classify okay.

**Supertim0r** · 07-30-2007, 09:15 AM

and Large FTTs priority 9

**luihed** · 07-30-2007, 09:29 AM

Originally Posted by georgesod

Ηow can it be that slower? Did you use the same multiplier?

Yup... Ran 514fsb x 7 1:1 ... Everything is the same cos I popped in the E6600 right after to make sure it wasnt something else....

Originally Posted by dinos22

maybe the abit is making it run on 1333 strap man

try an asus motherboard

I think its not just the Abit.... Its the chipset that makes it run at 1333fsb, the Performance level in Memset was even the same in both runs ( PL=6 )

Originally Posted by overcrash86

what is the cooling for max screen ?

Just water.... I was hoping these new cores will hit higher fsb but I didnt get a good one

**pippo369** · 07-30-2007, 10:42 AM

Originally Posted by pvhk

Gigabyte GA-G33M-DS2R in NSK3400 matx case, crucial ballistix 2x512, 7900GS xpertvision.
Bios F2 used
e6850@4ghz on air : thermalright ultra120
FSB@444, ratio 9x, vcore@1.56250v set in bios

What's the batch number?

**pvhk** · 07-30-2007, 10:49 AM

Originally Posted by pippo369

What's the batch number?

box retail
http://www.xtremesystems.org/forums/...4&postcount=11

**lazy** · 07-30-2007, 11:26 AM

which is the right one for getting the stablity? by orthos stable... small ftts is all thats needed? not blend?

ive seem alot of people posting orthos with small ftts and not blend

**JargonGR** · 07-30-2007, 01:04 PM

This is proof of what getting carried away means. Many of us upgraded to this new CPU thinking it would make a difference but it really was not worth it especiall for users like me that already had an E6600 @ 3.6Ghz 450FSB 1066 strap. I am now running 4Ghz @ 1333 strap and really it is just bragging rigths. Ofc Orthos does not run more than 2-3 hours stable but games play fine which is the main use of this PC.

I will probably sell my older CPU or this one since it was ultimately a waste to get it now. Instead I bougth myself new a pair of new KEF IQ9 speakers a a 300Watt RMS 12" KEF SUBWOOFER (piano Black) and a new KEF IQ6 CENTRAL Speaker to ease the dissapointment and stop myself from buying a not needed Q6850 with a new motherboard.

My 2 cents (Euro ones)

**Peepaw** · 07-30-2007, 01:40 PM

Originally Posted by road-runner

Yes that was at 4203Mhz but running both at the same time.

Thanks r-r, I feel better now.

**road-runner** · 07-30-2007, 02:03 PM

Originally Posted by Peepaw

road-runner what speeds were you running when you did your superpi 1m run?
14.312 is only a wee bit faster than my 6420@3504.

I hope that wasn't at 4+.

Heres a single superpi....

**lazy** · 07-31-2007, 07:59 AM

im not sure it theres something im doing wrong... or if its just my motherboard but heres my max
apparently no matter how much more vcore i give after this point, it just wont boot

**webwilli** · 07-31-2007, 10:36 AM

first short test with my new E6850 retail Boxed:

L719B016

still testing...

**Peepaw** · 07-31-2007, 11:57 AM

Well my e6850 arrived just a few minutes ago. I won't be able to install for awhile, but here's the numbers.

Prod code=BX80557E6850SLA9U
MM#=891188
FPO/batch=L719B014
Pack date=07/09/07

**pvhk** · 07-31-2007, 12:02 PM

Originally Posted by Peepaw

Well my e6850 arrived just a few minutes ago. I won't be able to install for awhile, but here's the numbers.

Prod code=BX80557E6850SLA9U
MM#=891188
FPO/batch=L719B014
Pack date=07/09/07

look at my batch!
http://www.xtremesystems.org/forums/...&postcount=11;)

**Grinch** · 07-31-2007, 12:38 PM

Originally Posted by Peepaw

Well my e6850 arrived just a few minutes ago. I won't be able to install for awhile, but here's the numbers.

Prod code=BX80557E6850SLA9U
MM#=891188
FPO/batch=L719B014
Pack date=07/09/07

where did you order from?

Originally Posted by pvhk

look at my batch!
http://www.xtremesystems.org/forums/...&postcount=11;)

where did you order from?

**nitteo** · 07-31-2007, 12:48 PM

Originally Posted by JargonGR

This is proof of what getting carried away means. Many of us upgraded to this new CPU thinking it would make a difference but it really was not worth it especiall for users like me that already had an E6600 @ 3.6Ghz 450FSB 1066 strap. I am now running 4Ghz @ 1333 strap and really it is just bragging rigths. Ofc Orthos does not run more than 2-3 hours stable but games play fine which is the main use of this PC.

I will probably sell my older CPU or this one since it was ultimately a waste to get it now. Instead I bougth myself new a pair of new KEF IQ9 speakers a a 300Watt RMS 12" KEF SUBWOOFER (piano Black) and a new KEF IQ6 CENTRAL Speaker to ease the dissapointment and stop myself from buying a not needed Q6850 with a new motherboard.

My 2 cents (Euro ones)

I CONCUR.

I have a gem of an e6600 Batch L629F (arguably the best OCing batch)

My e6850 batch 18a, seems volt hungry. Experimenting with AUTO voltage on a Striker Extreme, had it sucking 1.52 on 3.8ghz. I have to go manual voltage to 1.55v@3.85ghz to get through 3dmark01, 03, 05, 06 benches.

Trying anything over 3.85 would crash my system.

**pvhk** · 07-31-2007, 01:10 PM

Originally Posted by Grinch

where did you order from?

where did you order from?

i bought it at my french reseller...

**splmann** · 07-31-2007, 01:37 PM

Cicolinos E6850 @ Dryice -67 Grad 5015 MHZ

Motherboard: ASUS P5K Vanilla no Mods
CPU : Intel E6850
RAM : CELLSHOCK PC9200
Cooling : Otterauge Alu Pod

http://valid.x86-secret.com/show_oc.php?id=223201

SuperPi no Tweaks !!!

Regards

SPLMANN