Xeon X3230 (2.66GHz Kentsfield) G0 ES testing

[Achill3uS]

In these days I have this newbie..
QYPT ES
L713A290

after some lapping.. 3.6GHz 1.45v easy stable on air..

~1.53v
3900mhz valid http://valid.x86-secret.com/show_oc.php?id=220618
and 3900mhz 1M



but still testing, later update

[Lestat]

nice, keep going

what board are you using.
the P35 boards will open that chip up some more and let you do more.

[shimmishim]

is intel goign to release a X3230 even?

[Achill3uS]

nice, keep going

what board are you using.
the P35 boards will open that chip up some more and let you do more.

thanks, but on air around 3900mhz is the end.. I give 1.60v, and more airflow, but dont helps.. @3950-4000mhz system crash, validation corrupt
but @3600mhz I could lower that 1.45v i think, and its only idle 45 full load 75C!

I'm using Asus P5KC, you could see it on the validation

[Achill3uS]

is intel goign to release a X3230 even?

dunno, I havent seen before any X3230 results, its a good question..

[DMH]

Very good chip what are the voltage for 3.2Ghz???

[jugeen]

In these days I have this newbie..
QYPT ES
L713A290

after some lapping.. 3.6GHz 1.45v easy stable on air..

~1.53v
3900mhz valid http://valid.x86-secret.com/show_oc.php?id=220618
and 3900mhz 1M



but still testing, later update

n1 job! keep on OCing!

[eva2000]

Nice.. may i ask what's the max FSB you managed on this cpu ?

[jeffyjaixx]

Very nice.

Does the P5K C and P5K Deluxe clock around the same for quad's?

I need a new motherboard because my 965p is limited for quad's @ 360 FSB and I don't want to spend too much. The P5K C is about $100 cheaper than the Deluxe version...