WR!!! 666fsb by Oskar-Wu on DFI P35-T2R

[Charloz24]

max vdimm?

How about...plenty

[Sesto Sento]

How about...plenty

3v for ddr2 and 2.5v for ddr3 would be nice

[turtle]

I have to believe it's at least 3v, considering that's what the 650i board had. I doubt they'd step back from that in any way.

IIRC the p965-Dark went up to damn near 3.4v.

Oh yes, there will be vdimm.

I share Charloz's opinion.

As for DDR3, who knows...But I bet it'll be enough (for new DDR3 kits to come out demanding the high vdimm requirements for the speeds peeps will get from lower-rated kits at higher voltage)

[eva2000]

I know Oskar has been testing with a cascade, so this may be a screenie with the cpu heavily chilled.

Chilling CPU's does help with fsb overclocking, so you may see a little less than this on air cooling

Definitely true, my E6600 B1 ES cpu on water max FSB = 501FSB. On Kayl Black FrozenSS 1/4HP doing 536-540FSB on Asus Commando.

@8x536FSB





Still slow times compared due to being B1 stepping compared with my E6700 B2 @8x532FSB 1:1 4-4-4-5

of course, 666fsb under cascade.
but who cares. as I know, this mobo is benchable at 600fsb on Air, no doubt, a GEM chip is necessary.
and p35 chipset also have difference.
only 10% chipset can go higher than 600fsb as XX mobo manufacturer tested.

Dam that's a gem cpu for sure 600FSB air... every single core 2 i have played with hits an FSB wall around 490-514FSB on water

I hope Oskar plays with other cpu steppings so he can tweak the board for best FSB for all kinds of cpus and not just his gems