cool yeah i used 3.4 to save my bios and to edit the KO bios but I dont understand how to use nvflash lol
cool yeah i used 3.4 to save my bios and to edit the KO bios but I dont understand how to use nvflash lol
Mpower Max | 4770k | H100 | 16gb Sammy 30nm 1866 | GTX780 SC | Xonar Essence Stx | BIC DV62si | ATH AD700 | 550d | AX850 | VG24QE | 840pro 256gb | 640black | 2tb | CherryReds | m60 | Func1030 |
HEAT
i dont liek flashing bios ... thats hwy i am going to get ATI cards cuz with ATI tools u can change vGPU, vmem
E6600 @ 3.6
IN9 32x MAX
EVGA 8800Ultra
750W
very cool to know this works, thanks for sharing.
Current Setup:
-9850 GX2's in Quad SLI config
-Asus P5N32-SLI MB
-2x512mb of PC2-5300 DDR2
-Intel Celeron D OC'd to 3.2Ghz
-Windows Me with XP theme
-WD Caviar 20GB Hard Drive
-Zip drive
-Jazz drive
-3.5" floppy drive
-5.25" floppy drive
I modded the origianal BIOS with new core/strem/memory values and it did indeed give better performance than with Riva tiner and ATi tool. Thanks
******************************************
Respec'
System:Bunch of crappy overclocked PC's that cost an arm and a leg
when oc the gpu the shader goes up also , right . so if you mod your bios (whatever bios you want ,perferred one that you have already tried and know to work on your card )with nibitor and up the shader then flash your new bios . now stock your shader is set higher , so when you oc your gpu with rivatuner your shader goes higher than it could have before , because the shader will go higher than the core , but how much higher .
http://www.benchzone.com/page.php?al...erclocking_gui
http://service.futuremark.com/orb/pr...jectId=2480884
Last edited by heydo6; 07-17-2007 at 10:33 PM.
e8500 8x500 1.55v
ga-p35-ds3p
crucial ballistix 2x2gb
seagate 7200.10 3x320 raid0
xfx 8800gts
st75f 750w
li-lian rocketfish
fuzion...dd d5...pa120.3
so.. I compared the EVGA Bios to a default one:
Default: 576 / 1350 / 900
EVGA: 626 / 1458 / 1000
If you look closely at these numbers you will notice, that the shaderclock of the EVGA IS NOT OVERCLOCKED!!!
If you would increase the coreclock of the "default card" to 626, this would also lead to a 1458 shaderclock.
But why are the results higher?
Something strange is happening over here..
Last edited by Flip; 07-18-2007 at 02:31 PM.
Tighter memory timings perhaps?
Originally Posted by Leon2ky
I've looked at several different bioses and the memory timings all seem identical.
For the record, I flashed an OEM 8800GTX with the ACS3 bios without a problem. I then reflashed it with a modified bios where I increased the base line shader clock by 108mhz without a problem. It did gain me a slight improvement in 3Dmark06 but I'm sure it will be more useful in games.
£58.73 - This is the amount of money a loyal customer is worth to Overclockers.co.uk
Beware of buying from overclockers.co.uk, they will swindle you by abusing the consumer law if they need to refund you for faulty hardware. Thieving gits
that's right, the memtimings of the evga and xfx are identical.
I don't understand how this should lead to higher results, it makes no sense at all.
Posting Permissions
Bookmarks