Quote Originally Posted by PKdor View Post
I forgot when i try running the sistem at 1.65 vcore 267x12 and latencies 4-4-4-10 the computer gets to the loading of windows, but stays there forever...... Is it the ram?

Wich is the safe Volt for Vdimm, im scared to go further 2.1v, thanks madman for the advises and another question...

Is it better more fsb and less multiplier ? like reaching 3100 mhz with multiplier 12 is better than with 12.5?

greetings
regarding multis, some cores like higher, some doesnt like certain multis... it depends. Higher FSB vs Multi doesnt matter, as long as it keeps your mem at max try different combinations.

try loosen your timings, my ram (corsair 333mhz 4-4-4-12) is stable at 509mhz 5-4-5-9 but it boots with 4-4-5-9 but crashes in like 10mins.

without aditional cooling, i wouldnt go above 2.1V myself, but with a little airflow, i would say that under 2.3V its safe. I saw too much dead mems that were running at 2.5V on 680i mobos...
regards