World Debut ? Q6600 ES G0 By Coolaler

[dinos22]

mods should close all coolaler threads as the ones in the past as no one asked him if you can post it here......

[dogsx2]

And first two SS are taken while system is idling, but Orthos screen has only +1C while fully loading the CPU

1.168v on Orthos isn't much.

[GripS]

i think intel screwed the temp sensors on G0 CPUs as MANY of them idle below ambient temp!!!!!!!!!!!!!!!!!!!!

Yup. Doesn't seem possible. I would think the cooler wouldn't perform that well due to not having a completely flat surface(small gaps between the heatpipe+heatsink). The machining doesn't look to be done that well either. However it looks a LOT smaller and easier to work with then the monstrous scythe infinity that i am using now.

[dinos22]

Yup. Doesn't seem possible. I would think the cooler wouldn't perform that well due to not having a completely flat surface(small gaps between the heatpipe+heatsink). The machining doesn't look to be done that well either. However it looks a LOT smaller and easier to work with then the monstrous scythe infinity that i am using now.

here is an example of a G0 CPU owner and experience with temps

these chips are so coool....literally
my idle coretemp @ 20c ambient is 12c @3.6GHz @1.36v 6850.
dual orthos .05 droop 33c max under load @ 20 minutes dual orthos.
@3.4GHz 1.3v is dual orthos stable.
@ stock 3.33GHz this one is fine at 1.24v...havent tried lower volts yet.

[adamsleath]

well; the bios hardware monitor thingy says 27c at 20c ambient (ctemp says 15c)
so ctemp is probably reading about 10+c lower than
possible actual coretemp.

but i can say (like others) that the tuniq base is cool/cold to the touch even at load....so there
i know people tend to exaggerate...but it is cold.
i dont think ill be running 4.0 ghz...but 3.8 is very easily rock stable at about 1.43v/1.39 droop.

i have no idea what the actual coretemp is

i think im more worried about nb temps cos the cpu is 'cold'


But , basically, if this is indicative of G0 step heat (or coolness)
then a kentsfield G0 looks like an 'easy' 3.4-3.6 on air on average.
i dont think there will be many retail chips running 4 gig q6600 g0 on air
but still; im going to be wishing i had a quaddie at some stage...

[GripS]

here is an example of a G0 CPU owner and experience with temps

errr. The way i read that is his core temp is 20c and ambient is 12c. So that would actually make sense. Or is that the point you were trying to make?

[adamsleath]

coretemp is off with its reading of g0 temps i think.
ambient is 20; and my guess is that idle ctemp is about 30 ish. (bios temp reads 27c)
i believe bios temp usually reads 3-4c below what actual coretemp is.... but i could be wrong
ctemp is reading about 13c ...which seems impossible.

from this it looks to be about 10c under my old 6700.

whether a q6600 g0 will be/is 10c+ less than current q6600...who knows?

the only really reliable temperature measure i have at my disposal is my fingers on the heatsink

[Brother Esau]

I am certainly hoping temps are very good with the Q6600 G0 because I would be thrilled if I could run even 3.4ghz 24/7 with great temp ranges in the green!

P.S: Got my update from TANK GUYS this evening should be not far off for me...hoo hoo

[dinos22]

coretemp is off with its reading of g0 temps i think.
ambient is 20; and my guess is that idle ctemp is about 30 ish. (bios temp reads 27c)
i believe bios temp usually reads 3-4c below what actual coretemp is.... but i could be wrong
ctemp is reading about 13c ...which seems impossible.

from this it looks to be about 10c under my old 6700.

whether a q6600 g0 will be/is 10c+ less than current q6600...who knows?

the only really reliable temperature measure i have at my disposal is my fingers on the heatsink

well i bought a fluke 52 to try and measure temps at least close to what they should be so as soon as my CPU pops in i will stick a probe on the IHS to get a "close enough" value

[Hey_Its_Cole]

Well from the looks of things, maybe I will be able to go with air cooling when my chip comes in.

[wa2000]

From this post(if you can read chinese), coolaler said it himself that u need to add about 25C to the ASUS Probe CPU temperature reading.

[Vice]

Translated here

[GTX]

roomtemp 31c, coolered by tower120,
with default clcok,and P5K premium,damper disable, full speed over 55c, with damer enable,almost 60c.
Edit: tested at open room, not in a case

[Dumo]

Temp. is relative...As long as it can clocked like X6800 B1 on air (with double the cores) then its good

[dinos22]

roomtemp 31c, coolered by tower120,
with default clcok,and P5K premium,damper disable, full speed over 55c, with damer enable,almost 60c.
Edit: tested at open room, not in a case

:P: that one is running hot

is this you hicookie????




i agree with Dumo

who cares about temps as long as it benches this high

[GTX]

:P: that one is running hot

is this you hicookie????




i agree with Dumo

who cares about temps as long as it benches this high

yup,im, im worry about , intel's new retail boxes, most of comuping g0 and old b2 retails((produced in 2007)e6320~e6600) have big trouble with FSB oc

[dinos22]

yup,im, im worry about , intel's new retail boxes, most of comuping g0 and old b2 retails((produced in 2007)e6320~e6600) have big trouble with FSB oc

i've noticed a trend with lower end chips with some FSB issues (E6750, E6550 namely)

i hope that Q6600 doesn't suffer that fate....it would be nice giving it dry ice and hoping for decent 4x00MHz clocks

scary to hear that from you as well

[michaLcoughliN]

i h0pe the q6600 can hit 3.5ghz. ill be happy

[safan80]

mods should close all coolaler threads as the ones in the past as no one asked him if you can post it here......

he should of just posted it here himself. if everyone stopped posting things like this we'd all be bored and go elsewhere. his last activity here was 06-18-2007 so somebody else posting info here just helps him out. if he doesn't want to come here that's his choice.

[S&M]

First of all , the fact his not active here , it's due to some disagreement with some of the mods here , someting that I don't want to get into.
second, I have his permission to post it here.
also , About world debut , its marked with a question mark , as I didnt saw any other threads regarding this cpu, and since I know a lot of ppl waiting to see this stepping results, I asked coolaler's permission to post it here ...

[dinos22]

he should of just posted it here himself. if everyone stopped posting things like this we'd all be bored and go elsewhere. his last activity here was 06-18-2007 so somebody else posting info here just helps him out. if he doesn't want to come here that's his choice.

i'm pretty sure you've been told about this already

he has been accused of cheating in both SuperPI and 3DMARK which he never refuted................and he stopped posting here himself........probably for the best so we should let him be

i'm surprised he would want to have his posts up on XS? is he in a need of attention he doesn't get on other forums or something? i seriously doubt that

[96redformula]

What the heck did you all argue about that is so secretive? I just don't get it.....can't we all get along .

[safan80]

i'm pretty sure you've been told about this already

he has been accused of cheating in both SuperPI and 3DMARK which he never refuted................and he stopped posting here himself........probably for the best so we should let him be

i'm surprised he would want to have his posts up on XS? is he in a need of attention he doesn't get on other forums or something? i seriously doubt that

I didn't know your the first to tell me why he hasn't been here. if those in charge here think he's cheating then they should remove his posts. why should he refute any cheating accusations if he's not cheating. can you say for sure he's been cheating this whole time? XS can't just keep losing important members or else the quality will go down the tubes and this site won't mean anything anymore. you have to remember he didn't post this himself it's not his job to monitor this board that's why there's mods and admins here. We've already lost FCG and others. What if maxxracer, you, kunaak, AndreYang, eva2000, VictorWang, etc all stopped posting there wouldn't be much left. I know the board would go on but it wouldn't be the same.

[safan80]

I care because I like having only one place to go for my OC info.

[blind_ripper]

could a mod plz close this thread befor we have a flame war
thx