Arctic-Cooling MX-2

[Ar3s]

High Performance Thermal Compound for the Enthusiast
Turbo MX-2 is a high conductive and low resistance compound for components that require the best thermal dissipation. MX-2 is ideally suited for use in CPU, GPU cooling and other applications between power semiconductor components and heat sinks where high thermal conductivity is critical.

Main Features:

* High Thermal Conductivity
* Low Thermal Resistance
* Non-Electrical Conductive
* Non-Capacitive
* Non-Curing
* Non-Corrosive
* No Bleeding
* Odorless

No Metal Particles
Since the MX-2 compound does not contain any metal particles, there are no problems regarding electrical conductivity and capacitance. In contrast to silver and copper compounds, contact with electrical traces, pins, and leads cannot result in any damage.

Durability
Curing and bleeding of the compound is not possible. In contrast to metal or silicon pastes, this compound does not show decreasing performance over time, does not need to be reapplied and has a durability of at least 8 years.

Application:
CPU, GPU and other applications between power semiconductor components and heat sinks.



http://www.arctic-cooling.com/further_prod2.php?idx=140
http://www.mvktech.net/content/view/3568/

[Exedy]

nice..will be nice, at least MX-1 ftw

[SoulsCollective]

Needs reviews. If it beats out MX-1, though, I'm sold.

[Bei Fei]

Where can we buy some?

[LagunaX]

Yeah which etailer sells it?

[96redformula]

I have been doing comparisons with AS5 and MX-1, and MX-1 is defiantly better after the break in time. I can't wait to get a hold of some MX-2 to do some more testing .

Also, the fact that there is no cure time means we can get definitive results from the drop in temperatures to share on the forums. It makes one less factor when comparing temperatures.



I do have a little bit of a problem with MVK's testing methods. They did not allow the thermal paste's to cure the full amount of time. They stated they let it run until temperatures were stable, but many here have expressed that MX-1 has a significant drop after several days time.

[TheBeast1590]

MX-2 seems to give Coollab real competition

[ChaosMinionX]

MX-2 seems to give Coollab real competition

Id like to see it

[Origin_Unknown]

http://www.yoyotech.co.uk/product_in...90dc44c9d98f08

[ChaosMinionX]

Driver Heaven review:

http://www.driverheaven.net/reviews/...gMX2/index.php

[TheBeast1590]

http://www.yoyotech.co.uk/product_in...90dc44c9d98f08

10$..not bad btw its the price i pay for AC5 in Norway

[Bei Fei]

Anyplace in the states that has it?

[Jodiuh]

I could've sworn I had this in a cart somewhere...anyone?

[cantankerous]

cool, Ill grab a tube of this for my next build instead of the AS5/Ceramique that I have had lying around here for a few years now.

[MaxxxRacer]

Driver Heaven review:

http://www.driverheaven.net/reviews/...gMX2/index.php

what a useless review. How about they compare it to other high end thermal compounds instead of the garbage intel provides.

[TEDY]

http://www.mvktech.net/content/view/3568/39/

[Ar3s]

end of july it will be out everywhere.

[Jodiuh]

I moved my sink after a LAN and temps went up a bit, but they're good enough. I'll wait for this and hopefully I can find a nice washer for my TRUE's terrible mount.

[CERO]

hey guys, I have been testing the AS5 and MX-1 both, I cant seem to get the MX-1 well applied because I got way much higher temps then with AS5, how do u guys apply mx-1 on a core 2 duo, line methode like AS5? or just 1 drop in the middle, and how much?

[Makubex_GB]

what a useless review. How about they compare it to other high end thermal compounds instead of the garbage intel provides.

At least they compared it with MX-1, which as you know is one of the best and the one I'm most interested they compare it to since it's the one I'm currently using.

[Jodiuh]

...just 1 drop in the middle, and how much?

Bingo. Check AC's site for more info. I do use a bit more than AS5 tho.

[Ar3s]

hey guys, I have been testing the AS5 and MX-1 both, I cant seem to get the MX-1 well applied because I got way much higher temps then with AS5, how do u guys apply mx-1 on a core 2 duo, line methode like AS5? or just 1 drop in the middle, and how much?

yeah a drop don't spread it yourself use the heatsink to spread it and press out all the air. twist a free times. works great.

[CERO]

ait thnx al for your help, edit will defenaitly try it out, I did so far the Line methode like AS5, but that didnt helped so.