Results 1 to 25 of 509

Thread: Q6600 Overclocking Database.

Threaded View

  1. #11
    Xtreme Member
    Join Date
    May 2007
    Location
    Calgary, Alberta. Canada
    Posts
    252
    Quote Originally Posted by Koekerwauz_NL View Post
    I think 3,2 is possible with the B3 steppings.
    I hope you don't have to put the voltages up so high but it's deppending on what you get.
    If you have the right Mobo 3.2 is very easy to achieve on air and keep the temps reasonable. 3528 Mhz ,1 week stable contininuous Folding @ Home and temps never exceeded 60 deg c. Ambient temp was 22 deg c. As soon as ambient temp increases I have to back off the OC to keep below 60 deg. I have booted @ 3730 and ran Super PI and a few other apps but an Idle temp of 45 deg is probably going to top out at 75 deg+ and that's too high for me. I have had no troubles clocking the B3 stepping chip so far with my current board. I am sure it will go higher but with my cooling it would just be frustrating to know I can't use it.
    CPU and Heat sink are lapped BTW.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Quad @ 3528.PNG 
Views:	1376 
Size:	163.5 KB 
ID:	61553   Click image for larger version. 

Name:	Quad @ 3737.Ghz.PNG 
Views:	1384 
Size:	171.3 KB 
ID:	61554  
    Last edited by crossg; 07-11-2007 at 02:39 PM.
    Rig 1
    CPU: i7-990X. CASE: Antec Nine Hundred II. CPU Cooling: TR Venomous X RT. MOBO: ASUS Rampage III Formula. RAM: 12GB Mushkin DDR3 1600 CL7. GFX: EVGA GTX 580's x 2. SLI. HDD's: 1.5 TB Seagate, 1TB WD Sata III. Monitor: Samsung 25". PSU: Corsair AX 1200W. Win 7 64 Bit
    Rig 2.
    CPU: i7-2600K. CASE: Antec Nine Hundred II. CPU Cooling: TR Venomous X RT. MOBO: ASUS P8P67 Deluxe. RAM: 4 GB GSkill Ripjaws X DDR3 1600 CL6. GFX: EVGA GTX 580. HDD: 1TB WD Sata III. Monitor: Samsung 23". PSU: Corsair AX 1200W. Win 7 64 Bit.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •