Help OC new TF7050-M2!!!

[banshee28]

Ok, I kept the RAM volts within the suggested at 2.15v. With that and 5,5,5,18,26 timings I maxed at 430-435 Mhz stable. 440 failed with errors.

Now I brought it back to ~390's Mhz and trying to OC the 5200 CPU. I upped the volts 0.012v and CPU-Z shows it at 1.312 - 1.344. So far its failing Orthos at 2771 Mhz. 2750 seemed ok so far but not 100% or 24hrs testing.

My question is what is a good safe and healthy volts I should use for this CPU? I can up the volts 0.025 at a time...Should I increase it a little more?

Oh, my MB temps are a bit off due to the bios, but core temp shows in the 30's under orthos!

[banshee28]

Thanks everyone for all the help...I Finally got things working pretty good.

I was able to get about 2950 Mhz but the temps were getting in the 60's, so I backed down. I am now at 2860Mhz and Orthos stable! Temps 30/48

As for the RAM. Initially I increased the trfc values hoping that would fix things. Well it may have but I think most of my RAM issues were due to it being clocked at lower than suggested voltage! It was at about 1.9v so I changed it to 2.15v. Now I was able to move trfc back down to its lowest setting 75ms, and lower the timings a bit too.

This was a build for a friend so I am pretty happy with the results. Thanks!