hey guys I wanted to know , from some RAm expert ( hi eva), what procedure in memtest86 u guys going through, how many loops/hours/ or u loop just a certen test f.e. just test #5 or pared with other? I got some doubts @ my current RAM O/c, since I had 1 time a suddently reboot, With my current o/c it passes 8Hours prime Blend tho. But today I runned some memtest test #5 and it gaves errors even after 5 passes! what is a bit odd since I tested it before with 10 passes before I started to prime. The FSB was @ 382 and FSBv 1.20 NBv: 1.25 Vdimm: 2.30v @1222 with 5-5-5-15 / 4-30-12-4-4 mhz see signa. for specs. This morning I tried running 381 FSB ( with same timings/sub, with same volts however it runned test #5 passes 70 times and after that it errored( testing now subtmings set on AUTO on that tho) . Could this be NB related? since I got just 1.25v on it and how about FSBv got it @ 1.20. Or Should I lower the FSB another notch to 380fsb, Any help are welcome
* edit @ 381FSB it errored even after alrdy 2 passes test #5 now! with sub timings set on AUTO, and before I manually adjusted the subtmings to 4-30-12-4-4 and it went 70 passes before erroring, what values do the P5k set when u leave those sub timing @ AUTO? hmzz...
Reply With Quote
Bookmarks