**Official ABIT IP-35 Pro Review/Overclock/Guide Thread**

[furballi]

B's run hot but mine don't run that hot. I have 2 E6600s (L629B and L631B) and idle temps under air for the 629B at 1.44vcore is about 41C and the 631B at 1.44vcore is 34C. You may have something else going on with your 6700. My 629B is lapped, 631B unlapped.

E6320 and IP35-E Overclock

Managed to overclock an E6320 to 3.415GHz (488MHz FSB x 7 multi) with 1.51Vcore. NB, SB, and VTT were bumped up one notch to 1.29, 1.55, and 1.2375 respectively. Memory divider @ 1:1 with 5-4-4-9-2T timing.

Speedfan and CoreTemp 0.95 report 53C under Orthos Large mode (75F ambient). S&M shows 68C with 85C TJunction. The same program reports 100C TJunction on my E4300, which could explain why I'm seeing +14C under load with the 4300. 1M Super Pi time of 14.860 seconds. CPU will boot into Windows at 495MHz FSB x 6 multi, but it is not stable at this level of overclock. I suspect +500MHz FSB is possible with a better chip. My sample appears to have a 495MHz FSB wall.