Water Cooled Case Gallery

[Okda]

iam sure he is using the most famous coolant, the swiftech HydrX

[TRG]

My first serious start with using watercooling.




The problem with watercooling is the existence of forums like this XS, because it makes you want to expand your setup..

Another EVO120 and EK full 1950XTX coverblock are on the way..

[Okda]

can u show us a picture of the full side of ur case

[YugenM]

Heard that running a DDC upside down isn't good, but your loop is pretty sexy!

Any chance of getting a picture of the CPU block?

[TigerLord]

Sorry for the blurry pictures, my P&S has issues and I'm saving for a K10D so ...

This is the first time ever I built my own PC and it took me quite a while, but it was well worth it !

[Okda]

wow, the filling port is below the pump

that should have sucked while filling

[NickS]

LOL you shoulda watched me fill my old PC7 build. Tri rad @ top, pump second lowest, res LOWEST. Oh man. *shudders*

[Okda]

need a hug ? :P

LOL

seriously, that should have been a real PITA

[YugenM]

DDC upside down = bad ?

It may or may not be true, but it's just something I heard.

[TigerLord]

I fill and bleed my system upside down

[coolrmaster]

I had this thrown together to start with, one of Petra's kit's and once satisfied that I knew what I was doing (first W/C build) I took my rig apart and here's how she ended up. My rad and pump are in the tv stand that was used as a base for the case.





I have changed the tubing that Petra's gave me with the kit to 1/2" id, 3/4" od. Plus I guess the small tubing that came with the kit when I tried to push it on the plastic barbs for the rad, I pushed too hard and caused a leak. Or the rad was defective. Reguardless, I tried many different ways to stop the leak and finially took it to a rad shop and had it fixed. Cost as much as the rad. Maybe I could have bought the resin and solder and a torch and did it my self, but I wasn't sure I could. In the pic that's rtv all over the rad and tubing.

All in all, I think it turn out good, just need to buy more blue stuff to put in the water.

is the the tv mounted atop your pc

[ginnz]

My e6600.....

Asus p5b-plus with danger den rbx cpu block, and danger den Northbridge block. i had to make adapters out of 1/2" lexan for mounting the blocks! it worked well.i had the water stuff from my last build, which was an amd 2400+mobile on a dfi lanparty board. it died when i accidentally dremmeled the MB

heres a quick pic.

[Mad_Man]

you've dremmeled the mobo??? wtf were you doing? cutting case with hw in it? poor mobo...
do you have any pic?

[Mad_Man]

quick setup, have no place in case to put this tripple rad in....
must design some custom wood case for this rig

[coolmiester]

Nice paintjob man!!!

Only missing the wires

Cheers Yozzman - got some wires in at last

System Spec:
Tyan Tiger K8WE S2877ANRF
2x AMD Opteron 265 dual core SKT 940 Retail (1.8Ghz-0.9nm-2Mb)
4x 512GB OCZ 3200 EL DDR ECC Reg / Dual Channel
Gainwards 8800GTX Ultra Golden Sample
Antec 850 True Power Quattro PSU
2x 74GB Raptors

Watercooling:
2x Danger Den TDX A64 Blocks
Danger Den NV8800 Block
Danger Den Hard Drive Block
Laing DDC 10watt - Alphacool Dual Plexi Res
HWLabs Custom Made GTX X-Flow
2x Yate Loon D12SL-12
Tygon Hose
Fesser One Liquid

[Greg_1]

v nice PSU, and gr8 rig

[metalman2785]

iam sure he is using the most famous coolant, the swiftech HydrX

It is actually the dye from FrozenCPU.com

[SerialSniper]

wow. very good paint job. Was it done with a compressor?

[Okda]

It is actually the dye from FrozenCPU.com

/me finds a place to hide



which one is it please ==> here

[metalman2785]

/me finds a place to hide



which one is it please ==> here

This one, great deal for 5 bucks, it only takes a few drops for the entire loop. My little bottle will last me a lifetime

http://www.frozencpu.com/products/17...tml?tl=g30c103

[Okda]

ya it looks very nice for sure

[metalman2785]

ya it looks very nice for sure

Thanks!

I just ordered a couple silent x red led fans to replace the blue led fans it came with

[Lu(ky]

Hi guys

Here is my Lian Li V2000 with a Quad raiditor with (4) Silverstone FM121 fans on it. Swiftech 655 pump with 1/2 tygon tubing. Running a Storm on a Opt 165, cpu never goes over 32c on load. Planning on modding a second Quad next to the other one and put PSU and 2 raptors in the 5.25 bay area.

Amd Opteron 165 1.8 to 3.0
Asus A8N32 SLI
Corsair XMS PRO DDR550/PC4400 2GB
(4) x 36 Raid -0-
eVGA 7900 GTO
SB XF-i

[ownage]

Nothing to special,

My first watercooled Rig

parts:
-eheim station 600 (600litre 1.3m)
-masterkleer 1/2 tubing
-Swiftech Apogee GT (bowed)
-Black ICE GT Stealth 240 radiator

temps:
3600mhz 1.47v Orthos = 59C max.
3600mhz 1.47v WCG+other apps = 53C max.
3600mhz 1.47v 3dmark = 52C max.
3500mhz 1.42v Orthos = 50C max.
3200mhz 1.28v Orthos = max 46C max.

Tuniq 3600mhz 1.47v not Orthos stable = max 72C (tuniq sucks)

I like the Rad mounting, rad mounting like you never seen before

The first picture was without UV light, and was way to boring. In the other pictures you can see UV light.

[TRG]

@ ownage

The most original WC filled P180 I've seen so far

Care to sell your sidepanel? (mine is broken )