ASUS P5K Deluxe - Intel P35 Bearlake + E6600 B1 / Q6600 B3

[feanorAZ]

Does anyone else get weird MB temps? All of a sudden, after reading 40-50c all day PC probe jumped to 165c and after a restart the bios it shows -95c. This is at stock speeds and voltages. I shut the computer to see if the heatsinks are burning and they were'nt even warm. When I fired it up again, the MB temp is back to 40c. Weird.

What ever it was a full shut down seemed to clear it while a restart didn't.

[Speederlander]

Does anyone else get weird MB temps? All of a sudden, after reading 40-50c all day PC probe jumped to 165c and after a restart the bios it shows -95c. This is at stock speeds and voltages. I shut the computer to see if the heatsinks are burning and they were'nt even warm. When I fired it up again, the MB temp is back to 40c. Weird.

What ever it was a full shut down seemed to clear it while a restart didn't.

Yeah, it will do that. No real functional issues here though. Just off mobo temps.

[Supershanks]

40-50c

i asssume are idle sound a little warm mine are 33~35C 38~40C load. Pc probe & everest agree (strange but true). The reason for higher +3~5C has been posted msgclb
post#764 motherboard temperature FAQ for the P5K Deluxe / P5K-E / P5K3 Deluxe

What bios are you using, i'm on 0311

luck

[feanorAZ]

When I noticed it, I was running an Everest HD benchmark. Thanks for the link to that post, I'll check my case when I get home. I have a EnzoTech CPU heatsink with has a downfacing 120mm on it, so I don't think airflow is the problem. It also seems strange that the restart to check the bios resulted in a negative temp while the full shutdown restored "normal" readings. I am not really worried about it, just one of the early adopter niggles.

Yeah 0311.

[ChaosMinionX]

http://www.gigasize.com/get.php/3194979056/Report.htm

Been messin around with the board, im quite pleased with it atm. Above link is to Everest complete Bench report.

Bios rev. 0404
516x7 @ 1.475v .63x Voltage
NB - 1.55v
FSB - 1.4v
CPU PLL - 1.6v

DDR2 1033- 4-4-4-10-3-25-3-3-3 @ 2.25v
DRAM Static Read - Enabled
Transaction Booster - AUTO
Performance Level 7

EDIT: In my findings, DRAM Static Read - Enabled and Transaction Booster set to AUTO yields the best performance, the board wont boot with both enabled unfortunately.