Intel Celeron 440 stock 2.0ghz (stepping Q705A601) overclocking fun !!!!!

[Deschutes]

My Celeron430 can only oc@3.20Ghz. vcore1.400v with P5B Deluxe. My mobo have a problem about vcore for this cpu, the maximum in BIOS is 1.700v but in the windows is 1.400v.

http://valid.x86-secret.com/show_oc?id=204662

Celeron430 with HR-01
P5B Deluxe rev.C2 BIOS1101
2x1GB G.Skill DDR2-800 HZ
8800GTS 320MB
WD Raptor 10000rpm
Zippy 500 Watt

[funkflix]

Nice results!

I'm on water now, but i'm still FSB limited..





1M with my Ballistix -

[Solarfall]

Deschutes and funkflix keep pushing those chips they just seem to love the voltage...

[funkflix]

Maybe, but i stuck at ~ 390MHz, Voltage does not help anymore! I can run 3540MHz with 1,45V too.

[Solarfall]

Maybe, but i stuck at ~ 390MHz, Voltage does not help anymore! I can run 3540MHz with 1,45V too.

crap thats too bad...

btw guys just ordered a new benching board asus p5k deluxe.. lets see if i can do better in those Spi times

[PcCI2iminal]

crap thats too bad...

btw guys just ordered a new benching board asus p5k deluxe.. lets see if i can do better in those Spi times

i don`t think the P35 will be much faster than 680i in Pi,anyway Bearlake is very fun for benching

[Solarfall]

i don`t think the P35 will be much faster than 680i in Pi,anyway Bearlake is very fun for benching

thats ok cos i'm having it just for benching and maybe experimenting with dry ice..

[TEDY]

what batch do you have...is it Q651 ?

[Solarfall]

bro ...check the topic

[PcCI2iminal]

My Celeron430 can only oc@3.20Ghz. vcore1.400v with P5B Deluxe. My mobo have a problem about vcore for this cpu, the maximum in BIOS is 1.700v but in the windows is 1.400v.

http://valid.x86-secret.com/show_oc?id=204662

Celeron430 with HR-01
P5B Deluxe rev.C2 BIOS1101
2x1GB G.Skill DDR2-800 HZ
8800GTS 320MB
WD Raptor 10000rpm
Zippy 500 Watt

wait for a bios update



http://www.xtremesystems.org/forums/...7&postcount=63

http://www.xtremesystems.org/forums/...9&postcount=64

[Solarfall]

SuperPi run with dry ice.. this chip sucks.. only 4.150 mhz

more pics here:
http://www.xtremesystems.org/forums/...d.php?t=151243

[Tonin]

i did two days ago the IHS removal on the Pt1t's celeron 4400 ,and it's rock stable at 380*10 at 1.7V under a zalman 9500Cu ...

Here is the Cpu-z valid =>> http://valid.x86-secret.com/show_oc.php?id=216982

and Here the picture of the celeron uncovered =>>


(I'm really sorry but i just got my cell phone to shot it )

[Solarfall]

i did two days ago the IHS removal on the Pt1t's celeron 4400 ,and it's rock stable at 380*10 at 1.7V under a zalman 9500Cu ...

Here is the Cpu-z valid =>> http://valid.x86-secret.com/show_oc.php?id=216982

and Here the picture of the celeron uncovered =>>


(I'm really sorry but i just got my cell phone to shot it )

nice Tonin.. had no idea that the IHS was not soldered on..
btw to the forums bro

[Tonin]

thx for the welcome , i hadn't too no idea that it was not soldered , I cut all around the IHS with a rasor blade , and i was ready to pop it with my lighter , but i saw it was moving a little , i finnished cutting , and it comes ... i though that the die came with the IHS lol