A Positive Look at the Antec Nine Hundred (900) Case

[metalman2785]

Here is my new setup in a modded Antec 900 case. I cut a couple rectangles in the case with my dremel and routed most of the wires through the back. The case was painted by a friend who works in a custom paint shop. Most of his work is for motorcycles and cars, but he agreed to help me out with my case for a small fee

Water Cooling Parts Used:
Pump: MCP655
CPU Block: Swiftech Apoggee
Radiator: Swiftech single 120mm
Reservoir: Swiftech Micro

Order flows like this,
res->pump->radiator->cpu->res

On the res i am using a 1/2" fitting going to the pump and a 3/8" intake coming from the cpu block. The 1/2" tubing leads to the pump where it is then converted to 3/8" for the rest of the system. Temps are descent, 38C idle and 59C loaded with Orthos at 3.4ghz.

I got better temps with my dual heatercore and all 1/2" tubing, but I wanted this build to be really neat and all self contained.

Check it out!

Desk settup:



Front lights on



Front lights off



A good look at my w/c and yes that 80mm fan is glued to the northbridge, lol



Some UV action!





Feedback and comments appreciated, thanks guys!