ASUS P5K Deluxe - Intel P35 Bearlake + E6600 B1 / Q6600 B3

[hornet]

Someone could put SS with 400FSB@DDR1200 orthos blend.

Thanks

hornet

[Supershanks]

hornet
Someone could put SS with 400FSB@DDR1200 orthos blend.

9x400@2:3=1200 5,5,5,12,3,30,3,3 3 vd=2.3v vc=1.525v bios=0311

[hornet]

9x400@2:3=1200 5,5,5,12,3,30,3,3 3 vd=2.3v vc=1.525v bios=0311

Ok good work, already now you could put the settings applied in jumperfree.

[ChaosMinionX]

Any word on a 5 series BIOS for P5K Deluxe?

[sponge bob]

any help?! my e6850 seems to have fsb wall @ 475 i tryed with e6700 and fsb goed well over 500, maybe ther is some settings that wont let me past of 475 with e6850.

using asus p5k deluxe and adata ddr1066 memories.

Edit: it is a strap / divider problem... i need advice and sub timmings for p35

[eva2000]

any help?! my e6850 seems to have fsb wall @ 475 i tryed with e6700 and fsb goed well over 500, maybe ther is some settings that wont let me past of 475 with e6850.

using asus p5k deluxe and adata ddr1066 memories.

Edit: it is a strap / divider problem... i need advice and sub timmings for p35

what batch/pack date is your E6850 ?

[sponge bob]

what batch/pack date is your E6850 ?

L723A

[Pokerjo]

i have been having a problem with opening control panel in vista when my rig is over clocked

P5K, e6750@3600

When i try to open it it just flashes up and then goes in a second, i know others have had this prob but unless i missed somethng no one has found the answer, well if you type (control ncpa.cpl users) into CMD it will open up netwok connections in control panel and you can then select anything in contorl panel you like, not ideal but the best work around i have found.

hope this help someone as this has been @*#xing me right off

[msgclb]

i have been having a problem with opening control panel in vista when my rig is over clocked

P5K, e6750@3600

When i try to open it it just flashes up and then goes in a second, i know others have had this prob but unless i missed somethng no one has found the answer, well if you type (control ncpa.cpl users) into CMD it will open up netwok connections in control panel and you can then select anything in contorl panel you like, not ideal but the best work around i have found.

hope this help someone as this has been @*#xing me right off

I had raise the core voltage to 1.525v and cpu pll to 1.7v before I could get 4 hours of of stability with my e6750@3600. I'm not sure this would be stable for say 24 hours. I'd bet your system isn't stable.

http://www.xtremesystems.org/forums/...16&postcount=4

[M Diddy]

i have been having a problem with opening control panel in vista when my rig is over clocked

P5K, e6750@3600

When i try to open it it just flashes up and then goes in a second, i know others have had this prob but unless i missed somethng no one has found the answer, well if you type (control ncpa.cpl users) into CMD it will open up netwok connections in control panel and you can then select anything in contorl panel you like, not ideal but the best work around i have found.

hope this help someone as this has been @*#xing me right off

Actually, it's not stability.... I'm having the same issue as well. Have a look see here though!

http://support.microsoft.com/kb/936686/en-us