Here are my BIOS settings, I didn't change anything else while in Windows


AI Overclocking: Manual
CPU Ratio Control: Manual
- Ratio CMOS Setting: 9
FSB Frequency: 410
PCI-E Frequency: 102
DRAM Frequency: AUTO
DRAM Timing Control: Manual
CAS# Latency: 4
RAS# to CAS# Delay: 4
RAS# Precharge: 4
RAS# Activate to Precharge: 12
TWR: AUTO
TRFC: AUTO
TWTR: AUTO
TRRD: AUTO
TRTP: AUTO
DRAM Static Read Control: Enable

Transaction Booster: AUTO
Clock Over-Charging Mode: AUTO

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled

CPU Voltage: 1.4625
CPU Voltage Reference: AUTO
CPU Voltage Damper: Enable
CPU PLL Voltage: 1.50v
DRAM Voltage: 2.25
FSB Termination Voltage: 1.30v
North Bridge Voltage: 1.40v
North Bridge Voltage Reference: AUTO
South Bridge Voltage: AUTO

Advance CPU Settings
CPU Ratio Control: Manual
- Ratio CMOS Setting: 9
C1E Suppport: Disabled
Max CPUID Value Limit: Disabled
Vanderpool Technology: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled
PECI: Enabled

Right now I am Orthos @ 7x530 with the same settings 1:1. I am getting much higher benches in Everest and Sisoft of course with the higher fsb.


Thanks

My CPU is 12hours 3.7 stable so any tweaks I can do please help me out, I have had AMD for years and even though I have read every Intel thread for a month I am still lost as hell


Quote Originally Posted by ineedaname View Post
btw u still didn't really mention all the settings you were using i'm curious 2 know.