Here my results
SISTEM:
Cpu: E6600 L30A754
Memory: Cellshock PC8000 CL4 - Micron D9GKX (blue slot )
PSU:Hiper 580 Watt
Coolinhg: Zalman 9700NT
3600Mhz 8X451 Memory 1:1
Code:GENIE BIOS SETTING NB Strap Select 266MHz CPU Clock Ratio 8 X CPU Clock 451 MHz Boot Up Clock Auto MHz DRAM Speed 533 MHz PCIE Clock 100 MHz CPU FEATURE Thermal Management Control Disabled Limit CPUID MaxVal Disabled PPM Function Disabled C1E Function Disabled Execute Disable Bit Enabled Virtualization Technology Disabled Frequency Unlimit Disabled VOLTAGE SETTING CPU Voltage Setting +2.235mV DRAM Voltage Setting 2.050V VTT VOltage Setting 1.275V NB 1.25V Setting 1.35V SB 1.5V Setting 1.6V SB 1.05V Voltage Setting 1.05V Current CPU Voltage 1.42V Current DRAM Voltage 2.05V Current VTT 1.28V CUrrent NB Voltage 1.36V Current SB Voltage 1.60V DRAM TIMING DDR Configuration Mode Mode2 GTL+ Driving Strength Auto Enhance Data Transmitting Auto Enhance Adressing Auto DQ Calibration 5 Channel 1 CLK fine delay Auto Channel 2 CLK fine delay Auto CAS Latency Time [tCL] 4 DRAM RAS# to CAS# Delay [tRCD] 4 DRAM RAS# Precharge [tRP] 4 Precharge delay [tRAS] 10 All Precharge to Act 3 REF to ACT Delay [tRFC] 28 MCH ODT Latency 3 Write to PRE Delay [tWR] 9 Rank Write to Read Delay[tWTR] 9 ACT to ACT Delay [tRRD] 3 Read To Write delay [tRDWR] 8 Ranks Write to Write [tWRWR] 6 Ranks Read To Read [tRDRD] 6 Ranks Write to Read [tWRRD] 5 Read CAS# Precharge [tRTP] Auto All PRE to Refresh Auto
3600Mhz 7X500Memory 1:1
Code:GENIE BIOS SETTING NB Strap Select 266MHz CPU Clock Ratio 7 X CPU Clock 500 MHz Boot Up Clock Auto MHz DRAM Speed 533 MHz PCIE Clock 100 MHz CPU FEATURE Thermal Management Control Disabled Limit CPUID MaxVal Disabled PPM Function Disabled C1E Function Disabled Execute Disable Bit Enabled Virtualization Technology Disabled Frequency Unlimit Disabled VOLTAGE SETTING CPU Voltage Setting +2.225mV DRAM Voltage Setting 2.200V VTT VOltage Setting 1.275V NB 1.25V Setting 1.35V SB 1.5V Setting 1.6V SB 1.05V Voltage Setting 1.05V Current CPU Voltage 1.40V Current DRAM Voltage 2.20V Current VTT 1.28V CUrrent NB Voltage 1.36V Current SB Voltage 1.60V DRAM TIMING DDR Configuration Mode Mode2 GTL+ Driving Strength Auto Enhance Data Transmitting Auto Enhance Adressing Auto DQ Calibration 5 Channel 1 CLK fine delay Auto Channel 2 CLK fine delay Auto CAS Latency Time [tCL] 4 DRAM RAS# to CAS# Delay [tRCD] 4 DRAM RAS# Precharge [tRP] 4 Precharge delay [tRAS] 10 All Precharge to Act 3 REF to ACT Delay [tRFC] 28 MCH ODT Latency 3 Write to PRE Delay [tWR] 9 Rank Write to Read Delay[tWTR] 9 ACT to ACT Delay [tRRD] 3 Read To Write delay [tRDWR] 8 Ranks Write to Write [tWRWR] 6 Ranks Read To Read [tRDRD] 6 Ranks Write to Read [tWRRD] 5 Read CAS# Precharge [tRTP] Auto All PRE to Refresh Auto
Reply With Quote
Bookmarks