I see that in F2-6400CL5D-2GBNQ BIOS screenshots Hyper Path is disabled. How come?
Is it better to run this RAM without Hyper Path?
I see that in F2-6400CL5D-2GBNQ BIOS screenshots Hyper Path is disabled. How come?
Is it better to run this RAM without Hyper Path?
F2-6400CL4D-2GBHK (1GB x 2)
@ G.S. tech
Would this ram possibly do 500mhz + @ 4-4-4-12 ?
Thanks G.S. tech...........................
Last edited by Lt_JWS; 04-01-2007 at 02:46 PM.
E6750 w/ Ultra 120 Extreme
MSI P35 Neo2-FR [Bios 1.1]
2gigs G.Skill HZ PC2-6400 4-4-4-12
Sapphire HD 2900XT 512mb w/ HR-03
2x80gig SATA2 in Raid 0 | Vista x64
SilverStone Zeus 650w PSU
hello,
it was my first overlock
i've got e6600 with Noctua NH-U12F and gskill HK and a PW DH DELUX
if i do fsb to 333
What i do for timing for this memory
thanks for avance
Ondine
Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products
Check out our items on NewEgg
thank very much GS technician i test this week
best regards
ondine
Hello, I am new, I have a P5WDH and F2-6400CL5D - 4GBPQ:
It is possible to raise to me neither 400x8 nor 356x9
Like to have that to put the latencies to form and voltages?
Mch, Vmem, Vcore...
Thanks
My language is very poor
Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products
Check out our items on NewEgg
1,9 v. In both cases. I have Vista home premium 64 bits.
Thanks
It seems that we are not understood.
I wanted to know if it is possible to do something with these memories
or if he is better to then give back them by RMA nonbonds, are fake
Thanks
My hz chip gave out on me after about a year :/
One of the 2 chips died but it had a great run entire time it did 475 4-4-4-12 @2.1 with no hickups untill one day it gave me some issues and 2 days later it died. Do you have any info on 4gb sets 2x 2gb, as i'm looking for upgrade now.
Last edited by Pitbull; 12-21-2007 at 02:45 AM.
Are there any updates with 2x2GB sets for the P5W DH Deluxe? I emailed G.Skill but I got no reply.
Hi guys,
my cousin has the board too (like I) and wants to know if
are supported (just the same like soylinda) either 4 GB or 8 GBF2-8000CL5D-4GBPQ
the should run at least with 800 MHz (6400) or 1000 / 1066 MHz if possible
thanks
Last edited by kernelOfTruth; 05-16-2008 at 10:43 AM.
we don't have this motherboard on hand. but for sure DDR2 1000 F2-8000CL5D-4GBPQ is not going to run on p5wdh.
Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products
Check out our items on NewEgg
thanks, G.S Technician
Last edited by kernelOfTruth; 05-17-2008 at 03:53 AM.
Hello
I would like to see the F2-6400PHU2-2GBHZ ---DDR2 800 4-4-4-12 2V
BIOS SETTING pictures.That's in the first post but the link is broken
Thank you in advance
Bookmarks