The Official Brisbane Overclocking Thread

[2good4you]

As the other threads about the AMD cores, I made another for the brisbane core (65nm) so we can avoid unnecessary threads and make all results from all in one same place.


RULES

Overclocking results must include at least one screenshot with machinespec (cooling, temps, motherboard etc), like CPU-Z and the example below, assume from this

- Stepping and/or CPU Assembly Date
- VCORE
- Method of Cooling
- Temperatures (Software-based or Meter-derived)
- Specifications of System
- Stability Tests (SuperPi, Prime95, 3DMark, etc.)

Here you can see some results from other brisbanes

Only post results and hold the discussions in the PM's

Notice that the DTS is broken in the brisbane's!

My own results for the moment, just got stockcooling and waiting for my Thermalright Ultra-120 Extreme,

Stockcooling, 1.55v vcore ~75c ASUS M2N32SLI-DELUXE

[VVJ]

Your cpuz screenshot is not validated. So, it has to be posted at Fudzilla only

[nullface]

24/4 - http://valid.x86-secret.com/show_oc?id=207750
1.392v


Suicide - http://valid.x86-secret.com/show_oc.php?id=184746
1.6v - Stock cooled

[JAWS]

OEM X2 3600+

AD03600IAA5DL
CAAFG 0651 XPAW
393 "T" 1.565vcore

Brisbane was air cooled with stock hs.

mobo Biostar Tforce6100/5400ul Suicide cpu-z with only 1/2 day test

http://valid.x86-secret.com/show_oc?id=180140

[squidmaster]

nullface what were your temps?

[mAJORD]

Copy pasted most of this out of the other OC thread, so it's not deja vu. More relevent here.
(nice idea 2goodforyou)


* AM2 Brisbane X2 3600+

* CAALG 0708UPFW

* DFI LANPARTY 590 M/2

3120Mhz 8hr stable @ 1.44v - Big typhoon 23c Ambient



3300Mhz super pi stable @ 1.55v , cold water

[roadie]

Here's how I am getting along so far:

Stepping: CAALG 0717CAN
Cooling: Scythe Ninja
Voltage: 1.275 in BIOS, 1.3 in CPUZ
The rest: See screenshot

[Skillz]

Here is mine

So far been folding on this baby for about 30 minutes with no problems. Gonna let it fold all night, see how she does.

1.66V (According to the Biostar Utility) (1.6V in BIOS)
53 - 56C Temps
http://valid.x86-secret.com/show_oc.php?id=208053

[funnyperson1]

CPU Type: Athlon X2 3600+ Brisbane 65nm
Stepping: CAAFG 0652
Best Stable OC: 2945Mhz (9.5x310)
VCore: 1.4V
Temps: 50-51 C Full load
Cooling: Air (Thermalright Ultra 90)


The highest 24/7 365 stable oc I can do on this chip is 2.945 ghz at 1.4V (in bios, voltage reads 1.45 from Speedfan/CPUZ).

Here is a screenie with a 12+ hour Orthos test and and Nuclearus score:
http://filebox.vt.edu/users/asohangh...2945stable.JPG

The temp of the chip there is NOT as low as the SS indicates, for some reason Orthos screws up the Speedfan temps. I use the motherboard sensor as read by Speedfan usually and with two Toasts open max temp at this speed is 50-51C.

I can do 3ghz stable at 1.45V, but only with an extremely low ambient (like 65F or below), temps there are in the low-mid 50s.

Here are some screens of that:
http://filebox.vt.edu/users/asohangh.../threegigs.JPG
http://filebox.vt.edu/users/asohangh...egigstight.JPG

This was before I got the Ballistix, timings and memory speeds are much higher at 3gs, I can do DDR2 1000 C5 timings or DDR2 866+ C4 timings.

And finally, here is a suicide shot:
http://valid.x86-secret.com/show_oc?id=187485

[minibite3]

Stepping: Unknown
Vcore: 1.4 V in BIOS
Cooling: Stock
Temperatures (idle/load): ??/51
Stability tests: ORTHOS 8h stable
System: MSI K9N SLI-2F, AMD X2 3600+ Brisbane, 2x1024 Crucial Value Select PC5300 D9HNL




Highest clock: 293*9.5=2783,5 mhz @ 1.5 V.
Will post better results, just got started

[josty2]

Well, after seeing all the 3GHz+ stories here, I decided to get a 3600+ myself aswell. But it doesn't really clock that wonderfull. I allready ordered a 4400+ to replace this one, hoping it will be a tad better!
This is what it can do...
Speed: 2,81GHz
Voltage: 1,58V
Cooling: Thermalright SI-128 with 1400rpm fan

[MrBallpoint]

Is there someone who can tell me when i go to an mp 7 and a htt 390 the performances goes slightly down?
I mean is there an disagree possible when i lowerd the mp and go up with the htt?

Dfi Lp ut sli 590
brisbane 3600 x2
Team Group Xtreem-D2-800 2048
Liquide cooling.

regards Mrballpoint.

[JAWS]

just received a new mobo/ram for my Brisbane to play with.

Biostar TF570 SLI and Ballistix 8000

So far I've very impressed with the combination. 1157 MHz vdimm 2.0v

http://valid.x86-secret.com/show_oc?id=215222

http://img149.imageshack.us/img149/9595/amdly4.jpg

[JAWS]

more testing : 1209 MHz I haven't used the 2.4 jumper yet.

http://img72.imageshack.us/img72/1930/untitledcp1.jpg

http://valid.x86-secret.com/show_oc?id=215274

[shmaa]

CAAFG 0652 SPMW
1.4V set in bios
Thermalright Ultra-90
Biostar Tforce 6100


3.0ghz is the 24/7 setting..

3.1 was stable for benching

couldn't get 3.2 to load windows.

[PKdor]

Hello to all, I found this forum on the web, pretty good and interesting, I'm a Chilean, the third best score in SuperPi 2M on AM2 Socket here... for the moment! So im trying to get down to the first place, 1 second faster.


This is my Best OC
http://img442.imageshack.us/my.php?i...uperpi7wp3.jpg

and this happened when i Tried to get more out of the rams

http://img329.imageshack.us/my.php?i...superpipp5.jpg

I think I will and cant get another better timing in SuperPi

Thats why I came here to ask you guys...

My Computer is a

4800 Brisbane x2
With a DFI Infinity NF UltraII-m2
and some mushkin 2x1gb XP2-6400 (4-4-3-10)

My stable settings for SuperPi Where
- 248 FSB
- 12.5 Multiplier
- HT Link 993
- 1.6 Vcore
- 2.1 Vdimm
- 4-4-4-12 (23 TRC Bank Cylce Time) <--- Should I Lower this one too?!!?!?
- Mems workin @ 443x2 -> Somtin like 880 Mhz


I think thats all, a big hello for everyone and i hope I can easily integrate this community.

I invite you all to www.chilehardware.com a chilean overclocking and hardware website, pretty interesting with lots of reviews.

Bye

Cris

[Mad_Man]

well, you are the 4th then lol
my 2M super pi is 66.346s
try cl 5-4-4-x @800 divider, it may help
brisbane 4000+
3052Mhz@1.44V mem at 519mhz@2.3V 5-4-5-9

[PKdor]

well, you are the 4th then lol
my 2M super pi is 66.346s
try cl 5-4-4-x @800 divider, it may help
brisbane 4000+
3052Mhz@1.44V mem at 519mhz@2.3V 5-4-5-9

I forgot when i try running the sistem at 1.65 vcore 267x12 and latencies 4-4-4-10 the computer gets to the loading of windows, but stays there forever...... Is it the ram?

Wich is the safe Volt for Vdimm, im scared to go further 2.1v, thanks madman for the advises and another question...

Is it better more fsb and less multiplier ? like reaching 3100 mhz with multiplier 12 is better than with 12.5?

greetings

[tux08902]

- 1.325V
- Arctic Cooling Freezer64 Pro
- 33C/45C
- DFI Infinity NF570-M2/G, Corsair XMS2 DDR-667 1GB, X2 3600+ Brisbane
- OCCT

My first post. This is an older screenshot. I currently run 1.325V.

[Mad_Man]

I forgot when i try running the sistem at 1.65 vcore 267x12 and latencies 4-4-4-10 the computer gets to the loading of windows, but stays there forever...... Is it the ram?

Wich is the safe Volt for Vdimm, im scared to go further 2.1v, thanks madman for the advises and another question...

Is it better more fsb and less multiplier ? like reaching 3100 mhz with multiplier 12 is better than with 12.5?

greetings

regarding multis, some cores like higher, some doesnt like certain multis... it depends. Higher FSB vs Multi doesnt matter, as long as it keeps your mem at max try different combinations.

try loosen your timings, my ram (corsair 333mhz 4-4-4-12) is stable at 509mhz 5-4-5-9 but it boots with 4-4-5-9 but crashes in like 10mins.

without aditional cooling, i wouldnt go above 2.1V myself, but with a little airflow, i would say that under 2.3V its safe. I saw too much dead mems that were running at 2.5V on 680i mobos...
regards

[Mad_Man]

btw, aint 1.65V too much for 65nm chip? i hope your not pushing that 24/7 throught it... mine needs only 1.44V to reach 3052, and 1.46V to 3.1Ghz, but then the mem errors out

[PKdor]

btw, aint 1.65V too much for 65nm chip? i hope your not pushing that 24/7 throught it... mine needs only 1.44V to reach 3052, and 1.46V to 3.1Ghz, but then the mem errors out

Hmm 1.65 V is just for benchmarking like SuperPi, i never leave it like that 24/7, actually i leave it stock for 24/7 until i get a better PSU and my big tyhpoon VX

ill try then the memories @ 1000 mhz with 2.2V or 2.3V depends.... and loosen up a little bit the timings

thanks a lot!

[PKdor]

An update on my benchmarking and OC
got to first place in superpi2m
:F:F:F

[Mad_Man]

An update on my benchmarking and OC
got to first place in superpi2m
:F:F:F

nicely done mate
wish i had ram that will do 1+ghz at 4-4-4-x

[Mad_Man]

I have to tweak the rams further, but anyway it looks stable, at least 2Hours of Orthos...

296*10.5=3108Mhz
1.47 Vcore
mem 518 5-5-5-9 2.25V
Pi 2M: 65.603s

all day super duper stable
291*10.5=3052Mhz
1.44Vcore
mem 509 5-4-5-9 2.25V

btw, its brisbane 4000+ CAALG 0704 VPAW
http://valid.x86-secret.com/show_oc?id=218390